ADIN2111CCPZ-R7 datasheet(126/129 Pages) AD

126 / 129 page

Data Sheet

ADIN2111

REGISTERS

analog.com

Rev. A | 126 of 129

Table 254. Bit Descriptions for FG_IRQ_EN

Bits

Bit Name

Description

Reset

Access

[15:1]

RESERVED

Reserved.

0x0

FG_IRQ_EN

Frame Generator Interrupt Enable. When set, this bit indicates that the frame generator must generate an

interrupt when it has transmitted the programmed number of frames.

0x0

R/W

1: enable the frame generator interrupt.

0: disable the frame generator interrupt.

Frame Generator Frame Length Register

Device Address: 0x1F; Register Address: 0x8025, Reset: 0x006B, Name: FG_FRM_LEN

This register specifies the data field frame length in bytes. In addition to the data field, six bytes are added for the source address, six bytes

for the destination address, two bytes for the length field, and four bytes for the frame check sequence (FCS). The total length is the data field

length plus 18.

Table 255. Bit Descriptions for FG_FRM_LEN

Bits

Bit Name

Description

Reset

Access

[15:0]

FG_FRM_LEN

The Data Field Frame Length in Bytes.

0x6B

R/W

Frame Generator Interframe Gap Length Register

Device Address: 0x1F; Register Address: 0x8026, Reset: 0x000C, Name: FG_IFG_LEN

This register specifies the length in bytes of the interframe gap to be inserted between frames by the frame generator.

Table 256. Bit Descriptions for FG_IFG_LEN

Bits

Bit Name

Description

Reset

Access

[15:0]

FG_IFG_LEN

Frame Generator Interframe Gap Length. This register specifies the length in bytes of the interframe gap to be

inserted between frames by the frame generator.

0xC

R/W

Frame Generator Number of Frames High Register

Device Address: 0x1F; Register Address: 0x8027, Reset: 0x0000, Name: FG_NFRM_H

This register is Bits[31:16] of a 32-bit register that specifies the number of frames to be generated each time the frame generator is enabled or

restarted.

Table 257. Bit Descriptions for FG_NFRM_H

Bits

Bit Name

Description

Reset

Access

[15:0]

FG_NFRM_H

Bits[31:16] of the Number of Frames to be Generated.

0x0

R/W

Frame Generator Number of Frames Low Register

Device Address: 0x1F; Register Address: 0x8028, Reset: 0x0100, Name: FG_NFRM_L

This register is Bits[15:0] of a 32-bit register that specifies the number of frames to be generated each time the frame generator is enabled or

restarted.

Table 258. Bit Descriptions for FG_NFRM_L

Bits

Bit Name

Description

Reset

Access

[15:0]

FG_NFRM_L

Bits[15:0] of the Number of Frames to be Generated.

0x100

R/W

ADIN2111CCPZ-R7 Folha de dados(PDF) 126 Page - Analog Devices

ADIN2111CCPZ-R7 Folha de dados(HTML) 126 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL