| Os motores de busca de Datasheet de Componentes eletrônicos |
|
ADIN2111CCPZ-R7 Folha de dados(PDF) 21 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADIN2111CCPZ-R7 Folha de dados(HTML) 21 Page - Analog Devices |
|
21 / 129 page ![]() Data Sheet ADIN2111 THEORY OF OPERATION analog.com Rev. A | 21 of 129 is configurable for each LED using the LED0_FUNCTION and LED1_FUNCTION bits in the LED control register (LED_CNTRL). Note that the 7, 8, 9, and 10 (decimal) bit settings for LED0_FUNC- TION and LED1_FUNCTION are not available in LED Mode 2. LED Mode For each of the ADIN2111 LED pins, the activity behavior can be configured using the two LED modes, as follows: ► LED Mode 1: blink duty cycle defined using the LED 0 on/off blink time register (LED0_BLINK_TIME_CNTRL) ► LED Mode 2: blink duty cycle automatically defined by the ADIN2111 based on activity level (%) LED Pins Configuration Summary See Table 15 for the configuration options of the Px_LED_x pins. Table 15. LED Pins Configuration Summary Parameter Px_LED_0 Px_LED_1 Pin Number 19 (P1_LED_0), 47 (P2_LED_0) 21 (P1_LED_1), 48 (P2_LED_1) Internal Pull-Up or Pull-Down Resistor Pull-up Pull-down Status at Power-Up or Reset Enabled Disabled (via pin mux) LED Pin Mux Not applicable DIGIO_LED1_PINMUX bits in the Pin Mux Configuration 1 register Enable LED LED0_EN bit in the LED control register (default: enabled) LED1_EN bit in the LED control register (default: LED_1 output not enabled) LED Polarity LED0_POLARITY bits in the LED polarity register (default: autosense) LED1_POLARITY bits in the LED polarity register (default: autosense) LED Mode LED0_MODE bit in the LED control register (default: LED Mode 1) LED1_MODE bit in the LED control register (default: LED Mode 1) LED Function1 LED0_FUNCTION bits in the LED control register (default: LINKUP_TXRX_ACTIVITY) LED1_FUNCTION bits in the LED control register (default: TXRX_ACTIVITY) LED Blink Rate LED0_BLINK_TIME_CNTRL in the LED 0 on/off blink time register LED1_BLINK_TIME_CNTRL in the LED 1 on/off blink time register Maximum Current2 8 mA at 3.3 V 8 mA at 3.3 V 1 The 7, 8, 9, and 10 (decimal) settings for the LEDx_FUNCTION bits are not available in Mode 2. 2 See Table 1 for details. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |