ADIN2111CCPZ-R7 datasheet(121/125 Pages) AD

121 / 125 page

Data Sheet

ADIN2111

REGISTERS

analog.com

Rev. 0 | 121 of 125

Table 248. Bit Descriptions for FG_EN

Bits

Bit Name

Description

Reset

Access

[15:1]

RESERVED

Reserved.

0x0

FG_EN

Frame Generator Enable.

0x0

R/W

Frame Generator Control/Restart Register

Device Address: 0x1F; Register Address: 0x8021, Reset: 0x0001, Name: FG_CNTRL_RSTRT

This register controls the frame generator. The FG_CNTRL bit field specifies data field type used by the frame generator, for example, random

or all zeros. The FG_RSTRT bit restarts the frame generator.

Table 249. Bit Descriptions for FG_CNTRL_RSTRT

Bits

Bit Name

Description

Reset

Access

[15:4]

RESERVED

Reserved.

0x0

FG_RSTRT

Frame Generator Restart. When set, this bit restarts the frame generator. This bit is self clearing.

0x0

R/W SC

[2:0]

FG_CNTRL

Frame Generator Control.

0x1

R/W

000: no frames after completion of current frame.

001: random number data frame.

010: all zeros data frame.

011: all ones data frame.

100: alternative 0x55 data field.

101: data field decrementing from 255 (decimal) to 0.

Frame Generator Continuous Mode Enable Register

Device Address: 0x1F; Register Address: 0x8022, Reset: 0x0000, Name: FG_CONT_MODE_EN

This register is used to put the frame generator into continuous mode. The default mode of operation is burst mode, where the number of

frames generated is specified by the FG_NFRM_H and FG_NFRM_L registers.

Table 250. Bit Descriptions for FG_CONT_MODE_EN

Bits

Bit Name

Description

Reset

Access

[15:1]

RESERVED

Reserved.

0x0

FG_CONT_MODE_EN

Frame Generator Continuous Mode Enable. This bit is used to put the frame generator into

continuous mode or burst mode.

0x0

R/W

1: frame generator operates in continuous mode. In this mode, the frame generator keeps

generating frames indefinitely.

0: frame generator operates in burst mode. In this mode, the frame generator generates a single

burst of frames and then stops. The number of frames is determined by the FG_NFRM_H and

FG_NFRM_L registers.

Frame Generator Interrupt Enable Register

Device Address: 0x1F; Register Address: 0x8023, Reset: 0x0000, Name: FG_IRQ_EN

This register is used to enable the frame generator interrupt. An interrupt is generated when the requested number of frames has been

generated. Enable the frame checker/generator interrupt in the PHY_SUBSYS_IRQ_MASK register. Set the MAC_IF_FC_FG_IRQ_EN bit.

The interrupt status can be read via the MAC_IF_FC_FG_IRQ_LH bit in the PHY_SUBSYS_IRQ_STATUS register

ADIN2111CCPZ-R7 Folha de dados(PDF) 121 Page - Analog Devices

ADIN2111CCPZ-R7 Folha de dados(HTML) 121 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL