| Os motores de busca de Datasheet de Componentes eletrônicos |
|
PC87307 Folha de dados(PDF) 98 Page - National Semiconductor (TI) |
|
|
|
|||||||||||||||||||||||||||||
PC87307 Folha de dados(HTML) 98 Page - National Semiconductor (TI) |
|
98 / 218 page ![]() 98 www.national.com Result Phase Upon terminating the execution phase of the READ DATA command, the controller asserts IRQ6, indicating the begin- ning of the result phase. The microprocessor must then read the result bytes from the FIFO. The values that are read back in the result bytes are shown in Table 5-18. If an error occurs, the result bytes indicate the sector read when the error occurred. 76543210 Result Phase Status Register 0 (ST0) Result Phase Status Register 1 (ST1) Result Phase Status Register 2 (ST2) Track Number Head Number Sector Number Bytes-Per-Sector Code 5.7.11 The READ DELETED DATA Command The READ DELETED DATA command reads logical sec- tors containing a Address Mark (AM) for deleted data from the selected drive and makes the data available to the host microprocessor. This command is like the READ DATA command, except for the setting of the Control Mark bit (bit 6) in ST2 and the skip- ping of sectors. See description of execution phase. Command Phase See READ DATA command for a description of the com- mand bytes. Execution Phase Data read from disk drive is transferred to the system in DMA or non-DMA modes. See Section 5.4.2 on page 78. The effect of Skip Control (SK) on the READ DELETED DATA command is summarized in Table 5-19. 76543210 MT MFM SK 01100 IPS XXXX HD DS1 DS0 Track Number Head Number Sector Number Bytes-Per-Sector Code End of Track (EOT) Sector Number Bytes Between Sectors - Gap 3 Data Length (Obsolete) TABLE 5-18. Result Phase Termination Values with No Error a. End of Track sector number from the command phase. b. The number of the sector last operated on by controller. c. Track number programmed in the command phase Multi-Track (MT) Head # (HD) End of Track (EOT) Sector Number ID Information in Result Phase Track Number Head Number Sector Number Bytes-per-Sector Code 00 < EOTa Sector # No Change No Change Sectorb # + 1 No Change 00 = EOTa Sector # Trackc # + 1 No Change 1 No Change 01 < EOTa Sector # No Change No Change Sectorb # + 1 No Change 01 = EOTa Sector # Trackc # + 1 No Change 1 No Change 10 < EOTa Sector # No Change No Change Sectorb # + 1 No Change 10 = EOTa Sector # No Change 1 1 No Change 11 < EOTa Sector # No Change No Change Sectorb # + 1 No Change 11 = EOTa Sector # Trackc # + 1 0 1 No Change |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |