ADIN1300CCPZ-R7 datasheet(43/79 Pages) AD

43 / 79 page

Data Sheet

ADIN1300

Rev. 0 | Page 43 of 79

Bits

Bit Name

Description

Reset

Access

JABBER_DET_LAT

Jabber Detect Bit. When this bit goes high, it latches high until it is unlatched by reading.

0x0

1: jabber condition detected.

0: no jabber condition detected.

EXT_CAPABLE

The extended capability bit always reads as 1'b1 because the PHY provides an

extended set of capabilities.

0x1

PHY Identifier 1 Register

Address: 0x0002, Reset: 0x0283, Name: PHY_ID_1

This address corresponds to the MII status register specified in Clause 22.2.4.3.1 of IEEE Standard 802.3 and allows 16 bits of the

organizationally unique identifier (OUI) to be observed.

Table 33. Bit Descriptions for PHY_ID_1

Bits

Bit Name

Description

Reset

Access

[15:0]

PHY_ID_1

Organizationally Unique Identifier Bits[3:18].

0x283

PHY Identifier 2 Register

Address: 0x0003, Reset: 0xBC30, Name: PHY_ID_2

This address corresponds to the MII status register specified in Clause 22.2.4.3.1 of IEEE Standard 802.3 and allows 6 bits of the OUI

along with the model number and revision number to be observed.

Table 34. Bit Descriptions for PHY_ID_2

Bits

Bit Name

Description

Reset

Access

[15:10]

PHY_ID_2_OUI

Organizationally Unique Identifier Bits[19:24].

0x2F

[9:4]

MODEL_NUM

Manufacturer Model Number.

0x3

[3:0]

REV_NUM

Manufacturer Revision Number.

0x0

Autonegotiation Advertisement Register

Address: 0x0004, Reset: 0x01E1, Name: AUTONEG_ADV

This address corresponds to the autonegotiation advertisement register specified in Clause 28.2.4.1.3 of IEEE Standard 802.3. Note that

the default reset value of this register is dependent on the hardware configuration pins settings.

Table 35. Bit Descriptions for AUTONEG_ADV

Bits

Bit Name

Description

Reset

Access

NEXT_PAGE_ADV

Next page exchange occurs after the base link codewords have been exchanged. Next

page exchange consists of using the normal autonegotiation arbitration process to send

next page messages. Next page transmission ends when both ends of a link segment set

their next page bits to Logic 0, indicating that neither has anything additional to transmit.

0x0

R/W

RESERVED

Reserved.

0x0

REM_FLT_ADV

The remote fault bit provides a standard transport mechanism for the transmission of

simple fault information.

0x0

R/W

EXT_NEXT_PAGE_ADV

The extended next page bit indicates that the local device supports transmission of

extended next pages. The use of extended next page is orthogonal to the negotiated

data rate, medium, or link technology.

0x0

R/W

APAUSE_ADV

The technology ability field is a 7-bit wide field (Bits[11:5] within this register)

containing information indicating supported technologies specific to the selector field

value. This bit is to advertise asymmetric pause operation for full duplex links.

0x0

R/W

PAUSE_ADV

The technology ability field is a 7-bit wide field (Bits[11:5] within this register)

containing information indicating supported technologies specific to the selector field

value. This bit is to advertise pause operation for full duplex links.

0x0

R/W

T_4_ADV

The technology ability field is a 7-bit wide field (Bits[11:5] within this register) containing

information indicating supported technologies specific to the selector field value. This

bit is to advertise 100BASE-T4 and always reads as 1'b0 because this technology is not

supported.

0x0

ADIN1300CCPZ-R7 Folha de dados(PDF) 43 Page - Analog Devices

ADIN1300CCPZ-R7 Folha de dados(HTML) 43 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

Folha de dados Download

Ligação URL