| Os motores de busca de Datasheet de Componentes eletrônicos |
|
ADP1055ACPZ-R7 Folha de dados(PDF) 78 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADP1055ACPZ-R7 Folha de dados(HTML) 78 Page - Analog Devices |
|
78 / 140 page ![]() ADP1055 Data Sheet Rev. A | Page 78 of 140 STATUS_INPUT The STATUS_INPUT register returns the status of the input. A value of 1 in this command indicates that a fault has occurred. Table 75. Register 0x7C—STATUS_INPUT Bits Bit Name R/W Description 7 VIN_OV_FAULT R/W An input overvoltage fault has occurred. 6 VIN_OV_WARN R Not supported. 5 VIN_UV_WARN R Not supported. 4 VIN_UV_FAULT R/W An input undervoltage fault has occurred. 3 VIN_LOW R/W The device is off due to insufficient input voltage; that is, the input voltage is below the turn-off threshold. 2 IIN_OC_FAULT R/W An input overcurrent fault has occurred. 1 IIN_OC_WARN R Not supported. 0 PIN_OP_WARN R Not supported. STATUS_TEMPERATURE The STATUS_TEMPERATURE register returns temperature status. A value of 1 in this command indicates that a fault has occurred. Table 76. Register 0x7D—STATUS_TEMPERATURE Bits Bit Name R/W Description 7 OT_FAULT R/W An overtemperature fault has occurred. 6 OT_WARN R/W An overtemperature warning has occurred. 5 UT_WARN R Not supported. 4 UT_FAULT R Not supported. [3:0] Reserved R Reserved. STATUS_CML The STATUS_CML register returns communications, memory, and logic (CML) status. A value of 1 in this command indicates that a fault has occurred. Table 77. Register 0x7E—STATUS_CML Bits Bit Name R/W Description 7 CMD_ERR R/W Invalid or unsupported command received. 6 DATA_ERR R/W Invalid or unsupported data received. 5 PEC_ERR R/W Packet error check failed. 4 CRC_ERR R/W Memory fault detected (for example, a CRC error). 3 PROC_ERR R Not supported. 2 Reserved R Reserved. 1 COMM_ERR R/W Other communication fault not specified by Bits[7:2]. 0 MEM_ERR R/W Other memory or logic fault not specified by Bits[7:2]. This bit is set if the black box record number has been reached (Register 0xFE48[2]). STATUS_MFR_SPECIFIC The STATUS_MFR_SPECIFIC register returns the status of manufacturer specific faults. A value of 1 in this command indicates that a fault has occurred. Table 78. Register 0x80—STATUS_MFR_SPECIFIC Bits Bit Name R/W Description 7 GPIO4_FAULT R/W GPIO4 fault received. 6 GPIO3_FAULT R/W GPIO3 fault received. 5 GPIO2_FAULT R/W GPIO2 fault received. 4 GPIO1_FAULT R/W GPIO1 fault received. 3 IIN_OC_FAST_FAULT R/W Fast input overcurrent fault received. 2 IOUT_UC_FAST_FAULT R/W Fast output reverse current fault received. 1 IOUT_OC_FAST_FAULT R/W Fast output overcurrent current fault received. 0 VOUT_OV_FAST_FAULT R/W Fast output overvoltage fault received. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |