| Os motores de busca de Datasheet de Componentes eletrônicos |
|
ADIN1101CCPZ-R7 Folha de dados(PDF) 67 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
ADIN1101CCPZ-R7 Folha de dados(HTML) 67 Page - Analog Devices |
|
67 / 79 page ![]() Data Sheet ADIN1101 REGISTER SUMMARY analog.com Rev. A | 67 of 79 Table 110. Bit Descriptions for DIGIO_PINMUX2 (Continued) Bits Bit Name Description Reset Access 1011: TXD_3. 1100: LINK_ST. 1101: LED_0. 1111: off. [3:0] DIGIO_TXSOP_PINMUX Pin Mux Select for TX_SOP. 0xF R/W 0000: RXD_3. 0001: RXD_2. 0010: RXD_1. 0011: RX_CLK. 0100: RX_DV. 0101: RX_ER. 0111: TX_EN. 1000: TX_CLK. 1001: TXD_1. 1010: TXD_2. 1011: TXD_3. 1100: LINK_ST. 1101: LED_0. 1111: off. LED 0 On/Off Blink Time Register Device Address: 0x1E; Register Address: 0x8C80, Reset: 0x3636, Name: LED0_BLINK_TIME_CNTRL LED on blink time = LED0_ON_N4MS × 4 ms. LED off blink time = LED0_OFF_N4MS × 4 ms. If LED0_MODE = 0 and LED0_FUNCTION is set to blink, the LED activity starts with an LED off sequence, followed by an LED on sequence, and then repeats. If LED0_MODE = 1 and LED0_FUNCTION is set to blink, the LED activity starts with an LED on sequence, followed by an LED off sequence, and then repeats. If LED0_OFF_N4MS = LED0_ON_N4MS = 0, this is a special case whereby the internal activity signal as selected by LED0_FUNCTION can be monitored live. If LED0_FUNCTION is programmed to a combination of a link and activity signal, the LED is on while the link is up and with no activity. The LED switches off for either loss of link or receipt of activity. If LED0_FUNCTION is programmed to an activity signal, the LED is off with no activity. The LED switches on upon receipt of activity. Table 111. Bit Descriptions for LED0_BLINK_TIME_CNTRL Bits Bit Name Description Reset Access [15:8] LED0_ON_N4MS LED_0 On Blink Time. LED_0 on blink time is calculated by 4 ms × LED0_ON_N4MS bit field. The recommended value is greater than 3. 0x36 R/W [7:0] LED0_OFF_N4MS LED_0 Off Blink Time. LED_0 off blink time is calculated by 4 ms × LED0_OFF_N4MS bit field. The recommended value is greater than 3. 0x36 R/W LED Control Register Device Address: 0x1E; Register Address: 0x8C82, Reset: 0x8E80, Name: LED_CNTRL LED control register. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |