| Os motores de busca de Datasheet de Componentes eletrônicos |
|
BQ25708 Folha de dados(PDF) 44 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
BQ25708 Folha de dados(HTML) 44 Page - Texas Instruments |
|
44 / 94 page ![]() 9.6.1.4 ChargeOption3 Register (I2C address = 35/34h) [reset = 0030h] Figure 9-15. ChargeOption3 Register (I2C address = 35/34h) [reset = 0030h] 7 6 5 4 3 2 1 0 EN_HIZ RESET_REG RESET_ VINDPM EN_OTG EN_ICO MODE Reserved R/W R/W R/W R/W R/W R/W 7 6 5 4 3 2 1 0 Reserved EN_CONS VAP OTG_VAP _MODE IL_AVG OTG_RANGE _LOW BATFETOFF_ HIZ PSYS_OTG_ IDCHG R/W R/W R/W R/W R/W R/W R/W LEGEND: R/W = Read/Write; R = Read only; -n = value after reset Table 9-11. ChargeOption3 Register (I2C address = 35h) Field Descriptions I2C 35h FIELD TYPE RESET DESCRIPTION 7 EN_HIZ R/W 0b Device Hi-Z Mode Enable When the charger is in Hi-Z mode, the device draws minimal quiescent current. With VBUS above UVLO. REGN LDO stays on, and system powers from battery. 0b: Device not in Hi-Z mode <default at POR> 1b: Device in Hi-Z mode 6 RESET_REG R/W 0b Reset Registers All the registers go back to the default setting except the VINDPM register. VSYS_MIN will always go back to 1S default setting (3.584V), and the charging voltage goes back to the default values according to the cell pin setting. 0b: Idle <default at POR> 1b: Reset all the registers to default values. After reset, this bit goes back to 0. When the battery voltage is lower than minimal system voltage, or the battery is removed, it is NOT recommended to use this bit to reset the registers to default values. 5 RESET_VINDPM R/W 0b Reset VINDPM Threshold 0b: Idle 1b: Converter is disabled to measure VINDPM threshold. After VINDPM measurement is done, this bit goes back to 0 and converter starts. 4 EN_OTG R/W 0b OTG Mode Enable Enable device in OTG mode when EN_OTG pin is HIGH. 0b: Disable OTG <default at POR> 1b: Enable OTG mode to supply VBUS from battery. 3 EN_ICO_MODE R/W 0b Enable ICO Algorithm 0b: Disable ICO algorithm. <default at POR> 1b: Enable ICO algorithm. 2-0 Reserved R/W 0b Reserved Table 9-12. ChargeOption3 Register (I2C address = 34h) Field Descriptions I2C 34h FIELD TYPE RESET DESCRIPTION 7 Reserved R/W 0b Reserved BQ25713, BQ25713B SLUSD83C – JUNE 2018 – REVISED MAY 2023 www.ti.com 44 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated Product Folder Links: BQ25713 BQ25713B |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |