SPEAR1340 datasheet(39/200 Pages) STMICROELECTRONICS

39 / 200 page

SPEAr1340

Pin description

Doc ID 023063 Rev 4

39/200

Pin description

This chapter provides a full description of the ball characteristics and the signal multiplexing

of SPEAr1340 device.

●

Section 3.1 shows the pin map of SPEAr1340.

●

Section 3.2 shows the association between balls and pads providing a detailed

description of their terminal characteristics.

●

Section 3.3 describes the power supply pins.

●

Section 3.4 shows the multiplexing scheme for multiplexed IPs.

●

Section 3.5 describes the pinout for each IP, categorized by functionality.

●

Section 3.6 describes the strapping options configuration and the hardware Boot

selection.

The following table explains the table headers and abbreviations used in this chapter.

Note:

In this chapter “na” stands for “not applicable”.

Table 2.

Headers/abbreviations

Header

Description

Abbreviations

Ball

Ball number associated with each signal on

the package.

–

Pin name

Name of signals multiplexed on each ball.

Note that at reset and after reset release, all

I/O pads (except for USB) are in input. To

choose between the possible configurations,

you need to program each IP by software.

Please refer to Section 3.4: Multiplexed

signals description and SPEAr1340

reference manuals for more information.

–

Signal type

Signal information (direction, type)

I= Input

O= Output

IO= Input/output

S= Depending on strapping option

D= Open drain

PWR= Power supply

GND= Ground

Z= High-impedance

SPEAR1340 Folha de dados(PDF) 39 Page - STMicroelectronics

SPEAR1340 Folha de dados(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL