PIC12F508_09 datasheet(67/110 Pages) MICROCHIP

67 / 110 page

DS41236E-page 67

PIC12F508/509/16F505

9.7

MPLAB ICE 2000

High-Performance

In-Circuit Emulator

The MPLAB ICE 2000 In-Circuit Emulator is intended

to provide the product development engineer with a

complete microcontroller design tool set for PIC

microcontrollers. Software control of the MPLAB ICE

2000 In-Circuit Emulator is advanced by the MPLAB

Integrated Development Environment, which allows

editing, building, downloading and source debugging

from a single environment.

The MPLAB ICE 2000 is a full-featured emulator

system with enhanced trace, trigger and data monitor-

ing features. Interchangeable processor modules allow

the system to be easily reconfigured for emulation of

different processors. The architecture of the MPLAB

ICE 2000 In-Circuit Emulator allows expansion to

support new PIC microcontrollers.

The MPLAB ICE 2000 In-Circuit Emulator system has

been designed as a real-time emulation system with

advanced features that are typically found on more

expensive development tools. The PC platform and

Microsoft® Windows® 32-bit operating system were

chosen to best make these features available in a

simple, unified application.

9.8

MPLAB REAL ICE In-Circuit

Emulator System

MPLAB REAL ICE In-Circuit Emulator System is

Microchip’s next generation high-speed emulator for

Microchip Flash DSC and MCU devices. It debugs and

programs PIC® Flash MCUs and dsPIC® Flash DSCs

with the easy-to-use, powerful graphical user interface of

the MPLAB Integrated Development Environment (IDE),

included with each kit.

The MPLAB REAL ICE probe is connected to the design

engineer’s PC using a high-speed USB 2.0 interface and

is connected to the target with either a connector

compatible with the popular MPLAB ICD 2 system

(RJ11) or with the new high-speed, noise tolerant, Low-

Voltage Differential Signal (LVDS) interconnection

(CAT5).

MPLAB REAL ICE is field upgradeable through future

firmware downloads in MPLAB IDE. In upcoming

releases of MPLAB IDE, new devices will be supported,

and new features will be added, such as software break-

points and assembly code trace. MPLAB REAL ICE

offers significant advantages over competitive emulators

including low-cost,

full-speed

emulation, real-time

variable watches, trace analysis, complex breakpoints, a

ruggedized probe interface and long (up to three meters)

interconnection cables.

9.9

MPLAB ICD 2 In-Circuit Debugger

Microchip’s In-Circuit Debugger, MPLAB ICD 2, is a

powerful,

low-cost,

run-time

development

tool,

connecting to the host PC via an RS-232 or high-speed

USB interface. This tool is based on the Flash PIC

MCUs and can be used to develop for these and other

PIC MCUs and dsPIC DSCs. The MPLAB ICD 2 utilizes

the in-circuit debugging capability built into the Flash

devices. This feature, along with Microchip’s In-Circuit

Serial ProgrammingTM (ICSPTM) protocol, offers cost-

effective, in-circuit Flash debugging from the graphical

user interface of the MPLAB Integrated Development

Environment. This enables a designer to develop and

debug source code by setting breakpoints, single step-

ping and watching variables, and CPU status and

peripheral registers. Running at full speed enables

testing hardware and applications in real time. MPLAB

ICD 2 also serves as a development programmer for

selected PIC devices.

9.10

MPLAB PM3 Device Programmer

The MPLAB PM3 Device Programmer is a universal,

CE compliant device programmer with programmable

voltage verification at VDDMIN and VDDMAX

for

maximum reliability. It features a large LCD display

(128 x 64) for menus and error messages and a modu-

lar, detachable socket assembly to support various

package types. The ICSP™ cable assembly is included

as a standard item. In Stand-Alone mode, the MPLAB

PM3 Device Programmer can read, verify and program

PIC devices without a PC connection. It can also set

code protection in this mode. The MPLAB PM3

connects to the host PC via an RS-232 or USB cable.

The MPLAB PM3 has high-speed communications and

optimized algorithms for quick programming of large

memory devices and incorporates an SD/MMC card for

file storage and secure data applications.

PIC12F508 Folha de dados(PDF) 67 Page - Microchip Technology

PIC12F508 Folha de dados(HTML) 67 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL