BMP280 datasheet(41/49 Pages) BOSCH

Nome de Peças	BMP280

Descrição Electrónicos	Digital Pressure Sensor

PDF	49 Pages

Scroll/Zoom	100%

Fabricante Electrônico	BOSCH [Bosch Sensortec GmbH]

Página de início	https://www.bosch-sensortec.com

Logo

41 / 49 page

Bosch Sensortec | BMP280 Data sheet

41 |

Modifications reserved | Data subject to change without notice

Document number: BST-BMP280-DS001-26 Revision_1.26_102021

7.4

Soldering guidelines

The moisture sensitivity level of the BMP280 sensors corresponds to JEDEC Level 1, see also:

•

IPC/JEDEC J-STD-020C “Joint Industry Standard: Moisture/Reflow Sensitivity Classification for non-

hermetic Solid State Surface Mount Devices”

•

IPC/JEDEC J-STD-033A “Joint Industry Standard: Handling, Packing, Shipping and Use of Moisture/Reflow

Sensitive Surface Mount Devices”.

The sensor fulfils the lead-free soldering requirements of the above-mentioned IPC/JEDEC standard,

i.e. reflow soldering with a peak temperature up to 260°C. The minimum height of the solder after

reflow shall be at least 50µm. This is required for good mechanical decoupling between the sensor

device and the printed circuit board (PCB).

Figure 20: Soldering profile

BMP280 Folha de dados(PDF) 41 Page - Bosch Sensortec GmbH