ADIN1100CCPZ-R7 datasheet(1/78 Pages) AD

Nome de Peças	ADIN1100CCPZ-R7

Descrição Electrónicos	Robust, Industrial, Low Power 10BASE-T1L PHY

PDF	78 Pages

Scroll/Zoom	100%

Fabricante Electrônico	AD [Analog Devices]

Página de início	http://www.analog.com

Logo

1 / 78 page

Data Sheet

ADIN1100

Robust, Industrial, Low Power 10BASE-T1L PHY

Rev. 0

DOCUMENT FEEDBACK

TECHNICAL SUPPORT

Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog

Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to

change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

FEATURES

►

10BASE-T1L IEEE Standard 802.3cg-2019 compliant

►

Supports 1.0 V p-p and 2.4 V p-p transmit levels

►

Supports intrinsic safety applications

►

Cable reach

►

<1700 meters with 1.0 V p-p

►

<1700 meters with 2.4 V p-p

►

Low power consumption

►

Single supply 1 V p-p: 45 mW typical

►

Dual supply 1 V p-p: 39 mW typical

►

Diagnostics

►

Frame generator and checker

►

Multiple loopback modes

►

IEEE test mode support

►

Link and cable diagnostics

►

MII, RMII, and RGMII MAC interfaces

►

MDIO management interface

►

Unmanaged configuration using pin strapping

►

25 MHz crystal or external clock input (50 MHz for RMII)

►

Single or dual supply with 1.8 V or 3.3 V operation

►

3.3 V, 2.5 V, or 1.8 V MAC interface VDDIO supply

►

Integrated power supply monitoring and POR

►

EMC test standards

►

IEC 61000-4-4 EFT (±4 kV)

►

IEC 61000-4-2 ESD (±4 kV contact discharge)

►

IEC 61000-4-2 ESD (±8 kV air discharge)

►

IEC 61000-4-5 surge (±4 kV)

►

IEC 61000-4-6 conducted immunity (10 V/m)

►

IEC 61000-4-3 radiated immunity (Class A)

►

EN 55032 radiated emissions (Class B)

►

Small package: 40-lead, 6 mm × 6 mm LFCSP

►

Temperature range

►

Industrial: −40°C to +85°C

►

Extended: −40°C to +105°C

APPLICATIONS

►

Process control

►

Factory automation

►

Building automation

►

Field instruments and switches

FUNCTIONAL BLOCK DIAGRAM

Figure 1.

GENERAL DESCRIPTION

The ADIN1100 is a low power, single port, 10BASE-T1L transceiver

designed for industrial Ethernet applications and is compliant with

the IEEE® 802.3cg-2019™ Ethernet standard for long reach 10

Mbps single pair Ethernet (SPE). The ADIN1100 integrates an

Ethernet PHY core with all the associated analog circuitry, input and

output clock buffering, the management interface control register

and subsystem registers, as well as the MAC interface and control

logic to manage the reset, clock control, and pin configuration.

The ADIN1100 supports cable reach of up to 1700 meters with

autonegotiation enabled and has ultra low power consumption of 39

mW.

The PHY core supports the 1.0 V p-p operating mode and the 2.4 V

p-p operating mode defined in the IEEE 802.3cg standard and can

operate from a single power supply rail of 1.8 V or 3.3 V, with the

lower voltage option supporting the 1.0 V p-p transmit voltage level.

The ADIN1100 has an integrated voltage supply monitoring circuit

and power-on reset (POR) circuitry to improve system level robust-

ness.

The MDIO interface is a 2-wire serial interface for communication

between a host processor or MAC and the ADIN1100, thereby

allowing access to control and status information in the PHY core

management registers. This interface is compatible with both the

IEEE 802.3 Standard Clause 22 and Clause 45 management frame

structures.

Nº de peça semelhante - ADIN1100CCPZ-R7

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
Analog Devices	ADIN1100CCPZ-R7	1Mb / 80P	Robust, Industrial, Low Power 10BASE-T1L PHY Rev. B

More results

Descrição semelhante - ADIN1100CCPZ-R7

Fabricante Electrônico	Nome de Peças	Folha de dados	Descrição Electrónicos
List of Unclassifed Man...	L80227	689Kb / 140P	10BASE-T/ 100BASE-TX Ethernet PHY
Microchip Technology	KSZ8081RNA	454Kb / 52P	10BASE-T/100BASE-TX PHY with RMII Support 06/23/16
Texas Instruments	DP83826E	2Mb / 112P	DP83826E Deterministic, Low-Latency, Low-Power, 10/100 Mbps, Industrial Ethernet PHY
	DP83826E	2Mb / 115P	DP83826 Deterministic, Low-Latency, Low-Power, 10/100 Mbps, Industrial Ethernet PHY
	DP83TD510L	1Mb / 45P	DP83TD510E Ultra Low Power 802.3cg 10Base-T1L 10M Single Pair Ethernet PHY
Analog Devices	ADIN1100	696Kb / 50P	Robust, Industrial, Low Power 10BASE-T1L Ethernet PHY
	ADIN1110	1Mb / 104P	Robust, Industrial, Low Power 10BASE-T1L Ethernet MAC-PHY 10/2021-Revision 0
	ADIN1300	1Mb / 79P	Robust, Industrial, Low Latency and Low Power 10 Mbps 10/2019-Revision 0
	ADIN2111	1Mb / 125P	Low Complexity, 2-Port Ethernet Switch with Integrated 10BASE-T1L PHYs 12/2021-Revision 0
Microchip Technology	LAN8670	575Kb / 30P	10BASE-T1S Ethernet PHY Transceiver Product Brief

More results

ADIN1100CCPZ-R7 Folha de dados(PDF) 1 Page - Analog Devices

ADIN1100CCPZ-R7 Folha de dados(HTML) 1 Page - Analog Devices

Nº de peça semelhante - ADIN1100CCPZ-R7

Descrição semelhante - ADIN1100CCPZ-R7

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Folha de dados Download

Ligação URL