ADIN1100CCPZ-R7 datasheet(60/78 Pages) AD

60 / 78 page

Data Sheet

ADIN1100

ETHERNET CLAUSE 45 REGISTER DETAILS

analog.com

Rev. 0 | 60 of 78

VENDOR SPECIFIC 1 MMD IDENTIFIER LOW REGISTER

Device Address: 0x1E; Register Address: 0x0003, Reset: 0xBC81, Name: MMD1_DEV_ID2

This address corresponds to the Vendor Specific 1 MMD identifier register specified in Clause 45.2.11.1 of Standard 802.3 and allows six bits of

the OUI along with the model number and revision number to be observed.

Table 85. Bit Descriptions for MMD1_DEV_ID2

Bits

Bit Name

Description

Reset

Access

[15:10]

MMD1_DEV_ID2_OUI

Organizationally Unique Identifier, Bits[19:24].

0x2F

[9:4]

MMD1_MODEL_NUM

Model Number.

0x8

[3:0]

MMD1_REV_NUM

Revision Number.

0x1

VENDOR SPECIFIC 1 MMDS IN PACKAGE REGISTER

Device Address: 0x1E; Register Address: 0x0005, Reset: 0x008B, Name: MMD1_DEVS_IN_PKG1

Clause 22 registers and PMA/PMD, PCS, and autonegotiation MMDs are present.

Table 86. Bit Descriptions for MMD1_DEVS_IN_PKG1

Bits

Bit Name

Description

Reset

Access

[15:0]

MMD1_DEVS_IN_PKG1

Vendor Specific 1 MMDs in Package 1. Clause 22 registers and PMA/PMD, PCS, and autonegotiation

MMDs are present.

0x8B

Device Address: 0x1E; Register Address: 0x0006, Reset: 0xC000, Name: MMD1_DEVS_IN_PKG2

Vendor Specific 1 and Vendor Specific 2 MMDs are present.

Table 87. Bit Descriptions for MMD1_DEVS_IN_PKG2

Bits

Bit Name

Description

Reset

Access

[15:0]

MMD1_DEVS_IN_PKG2

Vendor Specific 1 MMDs in Package 2. Vendor Specific 1 and Vendor Specific 2 MMDs are present. 0xC000

VENDOR SPECIFIC 1 MMD STATUS REGISTER

Device Address: 0x1E; Register Address: 0x0008, Reset: 0x8000, Name: MMD1_STATUS

This address corresponds to the Vendor Specific 1 MMD status register specified in Clause 45.2.11.2 of Standard 802.3.

Table 88. Bit Descriptions for MMD1_STATUS

Bits

Bit Name

Description

Reset

Access

[15:14]

MMD1_STATUS

Vendor Specific 1 MMD Status.

0x2

10: device responding at this address.

11: no device responding at this address.

01: no device responding at this address.

00: no device responding at this address.

[13:0]

RESERVED

Reserved.

0x0

SYSTEM INTERRUPT STATUS REGISTER

Device Address: 0x1E; Register Address: 0x0010, Reset: 0x1000, Name: CRSM_IRQ_STATUS

This address can be used to check which interrupt requests have been triggered since the last time it was read. Each bit goes high when

the associated event occurs and then latches high until it is unlatched by reading. The bits of CRSM_IRQ_STATUS go high even when the

associated interrupts are not enabled. A reserved interrupt being triggered indicates a system error, which requires a hardware reset.

ADIN1100CCPZ-R7 Folha de dados(PDF) 60 Page - Analog Devices

ADIN1100CCPZ-R7 Folha de dados(HTML) 60 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78

Folha de dados Download

Ligação URL