HD64F2149YV datasheet(792/1075 Pages) RENESAS

Nome de Peças	HD64F2149YV

Descrição Electrónicos	Renesas 16-Bit Single-Chip Microcomputer H8S Family/H8S/2100 Series

PDF	1075 Pages

Scroll/Zoom	100%

Fabricante Electrônico	RENESAS [Renesas Technology Corp]

Página de início	http://www.renesas.com

Logo

792 / 1075 page

Section 24 Power-Down State

Rev. 3.00 Jan 18, 2006 page 764 of 1044

REJ09B0280-0300

24.7

Hardware Standby Mode

24.7.1

Hardware Standby Mode

When the

STBY pin is driven low, a transition is made to hardware standby mode from any mode.

In hardware standby mode, all functions enter the reset state and stop operation, resulting in a

significant reduction in power dissipation. As long as the prescribed voltage is supplied, on-chip

RAM data is retained. I/O ports are set to the high-impedance state.

In order to retain on-chip RAM data, the RAME bit in SYSCR should be cleared to 0 before

driving the

STBY pin low.

Do not change the state of the mode pins (MD1 and MD0) while the chip is in hardware standby

mode.

Hardware standby mode is cleared by means of the

STBY pin and the RES pin. When the STBY

pin is driven high while the

RES pin is low, the reset state is set and clock oscillation is started.

Ensure that the

RES pin is held low until the clock oscillation settles (at least 8 ms—the oscillation

settling time—when using a crystal oscillator). When the

RES pin is subsequently driven high, a

transition is made to the program execution state via the reset exception handling state.

HD64F2149YV Folha de dados(PDF) 792 Page - Renesas Technology Corp