| Os motores de busca de Datasheet de Componentes eletrônicos |
|
HD64F2149YV Folha de dados(PDF) 794 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD64F2149YV Folha de dados(HTML) 794 Page - Renesas Technology Corp |
|
794 / 1075 page ![]() Section 24 Power-Down State Rev. 3.00 Jan 18, 2006 page 766 of 1044 REJ09B0280-0300 24.8 Watch Mode 24.8.1 Watch Mode If a SLEEP instruction is executed in high-speed mode or subactive mode when the SSBY in SBYCR is set to 1, the DTON bit in LPWRCR is cleared to 0, and the PSS bit in TCSR (WDT1) is set to 1, the CPU makes a transition to watch mode. In this mode, the CPU and all on-chip supporting modules except WDT1 stop. As long as the prescribed voltage is supplied, the contents of some of the CPU’s internal registers and on-chip RAM are retained, and I/O ports retain their states prior to the transition. 24.8.2 Clearing Watch Mode Watch mode is cleared by an interrupt (WOVI1 interrupt, NMI pin, or pin IRQ0 to IRQ2, IRQ6, or IRQ7), or by means of the RES pin or STBY pin. Clearing with an Interrupt: When an interrupt request signal is input, watch mode is cleared and a transition is made to high-speed mode or medium-speed mode if the LSON bit in LPWRCR is cleared to 0, or to subactive mode if the LSON bit is set to 1. When making a transition to high- speed mode, after the elapse of the time set in bits STS2 to STS0 in SBYCR, stable clocks are supplied to the entire chip, and interrupt exception handling is started. Watch mode cannot be cleared with an IRQ0 to IRQ2, IRQ6, or IRQ7 interrupt if the corresponding enable bit has been cleared to 0, or with an on-chip supporting module interrupt if acceptance of the relevant interrupt has been disabled by the interrupt enable register or masked by the CPU. See section 24.6.3, Setting Oscillation Settling Time after Clearing Software Standby Mode, for the oscillation settling time setting when making a transition from watch mode to high-speed mode. Clearing with the RES RES RES RES Pin: See “Clearing with the RES Pin” in section 24.6.2, Clearing Software Standby Mode. Clearing with the STBY STBY STBY STBY Pin: When the STBY pin is driven low, a transition is made to hardware standby mode. |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |