| Os motores de busca de Datasheet de Componentes eletrônicos |
|
EM260-RTR Folha de dados(PDF) 27 Page - Silicon image |
|
|
|||||||||||||||||||||||||||||
EM260-RTR Folha de dados(HTML) 27 Page - Silicon image |
|
27 / 50 page EM260 Page 27 120-0260-000M Rev 1.1 corrupt command. For example, if the EM260 resets during the Response Section, the Host will still clock out the correct number of bytes. But when the host attempts to verify the value 0xA7 at the end of the Response, it will see either the value 0x00 or 0xFF and know that the EM260 just reset and the corrupt Response should be discarded. Note: The Length Byte only specifies the length of the Payload Frame. It does not include the Frame Terminator. 5.5 SPI Byte Table 15 lists the possible commands and their responses in the SPI Byte. Table 15. SPI Commands & Reponses Command Value Command Response Value Response Any Any 0x00 EM260 reset occurred—This is never used in another Response; it always indicates an EM260 Reset. Any Any 0x01 Oversized Payload Frame received—This is never used in another Response; it always indicates an overflow occurred. Any Any 0x02 Aborted Transaction occurred—This is never used in another Response; it always indicates an aborted transaction occurred. Any Any 0x03 Missing Frame Terminator—This is never used in another Response; it always indicates a Missing Frame Terminator in the Command. Any Any 0x04 Unsupported SPI Command—This is never used in another Response; it always indicates an unsupported SPI Byte in the Command. 0x00 – 0x09 Reserved [none] [none] 0x0A SPI Protocol Version 0x81 – 0xBF bit[7] is always set. bit[6] is always cleared. bit[5:0] is a number from 1–63. 0x0B SPI Status 0xC0 – 0xC1 bit[7] is always set. bit[6] is always set. bit[0]— Set if Alive. 0x0C – 0xFC Reserved [none] [none] 0xFD Bootloader Frame 0xFD Bootloader Frame 0xFE EZSP Frame 0xFE EZSP Frame 0xFF Invalid 0xFF Invalid 5.5.1 Primary SPI Bytes There are four primary SPI Bytes: SPI Protocol Version, SPI Status, Bootloader Frame, and EZSP Frame. SPI Protocol Version [0x0A]: Sending this command requests the SPI Protocol Version number from the SPI Interface. The response will always have bit 7 set and bit 6 cleared. In this current version, the response |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |