| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MPC8360CVVALFGA Folha de dados(PDF) 20 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8360CVVALFGA Folha de dados(HTML) 20 Page - Freescale Semiconductor, Inc |
|
20 / 102 page ![]() MPC8360E/MPC8358E PowerQUICC II Pro Processor Revision 2.x TBGA Silicon Hardware Specifications, Rev. 5 20 Freescale Semiconductor DDR and DDR2 SDRAM AC Electrical Characteristics This table provides the DDR capacitance when GVDD(typ) = 2.5 V. 6.2 DDR and DDR2 SDRAM AC Electrical Characteristics This section provides the AC electrical characteristics for the DDR and DDR2 SDRAM interface. 6.2.1 DDR and DDR2 SDRAM Input AC Timing Specifications This table provides the input AC timing specifications for the DDR2 SDRAM interface when GVDD(typ) = 1.8 V. Input high voltage VIH MVREF + 0.18 GVDD + 0.3 V — Input low voltage VIL –0.3 MVREF – 0.18 V — Output leakage current IOZ —±10 μA 4 Output high current (VOUT = 1.95 V) IOH –15.2 — mA — Output low current (VOUT = 0.35 V) IOL 15.2 — mA — MVREF input leakage current IVREF —±10 μA— Input current (0 V ≤VIN ≤OVDD)IIN —±10 μA— Notes: 1. GVDD is expected to be within 50 mV of the DRAM GVDD at all times. 2. MVREF is expected to be equal to 0.5 × GVDD, and to track GVDD DC variations as measured at the receiver. Peak-to-peak noise on MVREF may not exceed ±2% of the DC value. 3. VTT is not applied directly to the device. It is the supply to which far end signal termination is made and is expected to be equal to MVREF. This rail should track variations in the DC level of MVREF. 4. Output leakage is measured with all outputs disabled, 0 V ≤V OUT ≤GVDD. Table 17. DDR SDRAM Capacitance for GVDD(typ) = 2.5 V Parameter/Condition Symbol Min Max Unit Notes Input/output capacitance: DQ, DQS CIO 68 pF 1 Delta input/output capacitance: DQ, DQS CDIO —0.5 pF 1 Note: 1. This parameter is sampled. GVDD = 2.5 V ± 0.125 V, f = 1 MHz, TA = 25° C, VOUT = GVDD/2, VOUT (peak-to-peak) = 0.2 V. Table 18. DDR2 SDRAM Input AC Timing Specifications for GVDD(typ) = 1.8 V At recommended operating conditions with GVDD of 1.8 V ± 5%. Parameter Symbol Min Max Unit Notes AC input low voltage VIL —MVREF – 0.25 V — AC input high voltage VIH MVREF + 0.25 — V — Table 16. DDR SDRAM DC Electrical Characteristics for GVDD(typ) = 2.5 V (continued) Parameter/Condition Symbol Min Max Unit Notes |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |