PIC16C72 datasheet(75/128 Pages) MICROCHIP

75 / 128 page

PIC16C72 Series

 1998-2013 Microchip Technology Inc.

Preliminary

DS39016B-page 75

11.0

INSTRUCTION SET SUMMARY

Each PIC16CXXX family instruction is a 14-bit word

divided into an OPCODE which specifies the instruc-

tion type and one or more operands which further spec-

ify the operation of the instruction. The PIC16CXXX

family instruction set summary in Table 11-2 lists byte-

oriented, bit-oriented, and literal and control opera-

tions. Table 11-1 shows the opcode field descriptions.

For byte-oriented instructions, 'f' represents a file reg-

ister designator and 'd' represents a destination desig-

nator. The file register designator specifies which file

The destination designator specifies where the result of

the operation is to be placed. If 'd' is zero, the result is

placed in the W register. If 'd' is one, the result is placed

in the file register specified in the instruction.

For bit-oriented instructions, 'b' represents a bit field

designator which selects the number of the bit affected

by the operation, while 'f' represents the number of the

file in which the bit is located.

For literal and control operations, 'k' represents an

eight or eleven bit constant or literal value.

TABLE 11-1

OPCODE FIELD

DESCRIPTIONS

The instruction set is highly orthogonal and is grouped

into three basic categories:

• Byte-oriented operations

• Bit-oriented operations

• Literal and control operations

All instructions are executed within one single instruc-

tion cycle, unless a conditional test is true or the pro-

gram counter is changed as a result of an instruction.

In this case, the execution takes two instruction cycles

with the second cycle executed as a NOP. One instruc-

tion cycle consists of four oscillator periods. Thus, for

an oscillator frequency of 4 MHz, the normal instruction

execution time is 1

s. If a conditional test is true or the

program counter is changed as a result of an instruc-

tion, the instruction execution time is 2

s.

Table 11-2 lists the instructions recognized by the

MPASM assembler.

Figure 11-1 shows the general formats that the instruc-

tions can have.

All examples use the following format to represent a

hexadecimal number:

0xhh

where h signifies a hexadecimal digit.

FIGURE 11-1: GENERAL FORMAT FOR

INSTRUCTIONS

A description of each instruction is available in the PIC®

Mid-Range MCU Family Reference Manual, DS33023.

Field

Description

Working register (accumulator)

Bit address within an 8-bit file register

Literal field, constant data or label

Don't care location (= 0 or 1)

The assembler will generate code with x = 0. It is the

recommended form of use for compatibility with all

Microchip software tools.

Destination select; d = 0: store result in W,

d = 1: store result in file register f.

Default is d = 1

Program Counter

Time-out bit

Power-down bit

Note:

To maintain upward compatibility with

future PIC16CXXX products, do not use

the OPTION and TRIS instructions.

Byte-oriented file register operations

d = 0 for destination W

OPCODE

f (FILE #)

d = 1 for destination f

f = 7-bit file register address

Bit-oriented file register operations

10 9

7 6

OPCODE

b (BIT #)

f (FILE #)

b = 3-bit bit address

f = 7-bit file register address

Literal and control operations

OPCODE

k (literal)

k = 8-bit immediate value

OPCODE

k (literal)

k = 11-bit immediate value

General

CALL

and GOTO instructions only

PIC16C72 Folha de dados(PDF) 75 Page - Microchip Technology

PIC16C72 Folha de dados(HTML) 75 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL