AS3953A-BDFM datasheet(2/71 Pages) AMSOSRAM

2 / 71 page

ams Datasheet

Page 1

[v1-05] 2019-Feb-15

Document Feedback

AS3953A

14443 High Speed Passive Tag

Interface

The AS3953A NFC interface IC (NFiC) delivers low cost, ultra low

power NFC Forum functionality to multiple different

applications. The AS3953A is a analog front-end with integrated

14443A data framing and SPI interface. It is designed to create

a fast data link between an ISO 14443A reader device (PCD) and

a microcontroller. The AS3953A is passively powered meaning

that it can be supplied from the PCD magnetic field, eliminating

the need of a continual external supply. This makes the

AS3953A perfect for wireless communication to a low-power

battery powered device.

The AS3953A is used with an appropriate antenna coil

connected to the terminals LC1 and LC2, and behaves as a

normal passive ISO 144443A tag (PICC). After the anti-collision

protocol is passed, the PCD sends a Wake-Up command, which

wakes up the microcontroller by sending an interrupt. From this

point onwards, the AS3953A serves as a data link between the

microcontroller and the PCD. AS3953A can also operate as

NFCIP-1 target at 106 kbit/s.

The AS3953A includes an onboard EEPROM that can be

accessed either from the PCD or from the microcontroller via

the SPI interface. This built-in flexibility makes it ideal for two

types of applications:

• Where personalization data is programmed by the PCD

(even in case the SPI side is not powered) and it is later

read by microcontroller through SPI interface.

• Where log data is stored periodically by the

microcontroller and can then be read by the PCD even

when the microcontroller is not powered.

A regulated power supply voltage extracted from the PCD field

is also available on a pin and can be used as power supply for

external circuitry. For example, an external microcontroller and

a sensor could be powered from the PCD field combined with

pass through data rates up to 848kbit/s, which means the

AS3953A is ideal for contactless passive programming of MCU

systems. The AS3953A can also operate as a stand-alone ISO

14443A tag.

The AS3953A supports ISO 14443A up to Level-4, meaning a

contactless smart card or an NFC forum compatible tag (Tag

Type 4) can be built. Having a NFC Forum compatible tag

interface allows the AS3953A to be used in an application where

a standard NFC enabled phone is used as a PCD.

Ordering Information and Content Guide appear at end of

datasheet.

General Description

AS3953A-BDFM Folha de dados(PDF) 2 Page - ams-OSRAM AG

AS3953A-BDFM Folha de dados(HTML) 2 Page - ams-OSRAM AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

Folha de dados Download

Ligação URL