CY8CKIT-059 datasheet(5/48 Pages) CYPRESS

5 / 48 page

CY8CKIT-059 PSoC® 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *G

Safety Information

Regulatory Compliance

The CY8CKIT-059 PSoC® 5LP Prototyping Kit is intended for use as a development platform for

hardware or software in a laboratory environment. The board is an open system design, which does

not include a shielded enclosure. This may cause interference to other electrical or electronic

devices in close proximity. In a domestic environment, this product may cause radio interference. In

such cases, you may be required to take adequate preventive measures. In addition, this board

should not be used near any medical equipment or RF devices.

Attaching additional wiring to this product or modifying the product operation from the factory default

may affect its performance and cause interference with other apparatus in the immediate vicinity. If

such interference is detected, suitable mitigating measures should be taken.

The PSoC 5LP Prototyping Kit, as shipped from the factory, has been verified to meet with

requirements of CE as a Class A product.

The PSoC 5LP Prototyping Kit contains electrostatic

discharge (ESD) sensitive devices. Electrostatic charges

readily accumulate on the human body and any equipment,

and can discharge without detection. Permanent damage

may occur on devices subjected to high-energy discharges.

Proper ESD precautions are recommended to avoid

performance degradation or loss of functionality. Store

unused PSoC 5LP Prototyping Kit boards in the protective

shipping package.

End-of-Life/Product Recycling

This kit has an end-of life five years from the date of

manufacture mentioned on the back of the box. Contact your

nearest recycler for discarding the kit.

CY8CKIT-059 Folha de dados(PDF) 5 Page - Cypress Semiconductor