UCD3138 datasheet(2/89 Pages) TI1

2 / 89 page

UCD3138

SLUSAP2G – MARCH 2012 – REVISED SEPTEMBER 2016

www.ti.com

Submit Documentation Feedback

Product Folder Links: UCD3138

Device Overview

1.2

Applications

•

Power Supplies and Telecom Rectifiers

•

Power Factor Correction

•

Isolated DC-DC Modules

(1)

For more information, see Section 11, Mechanical Packaging and Orderable Information.

(2)

Recommended for new 40-pin designs with advanced BLR performance.

1.3

Description

The UCD3138 is a digital power supply controller from Texas Instruments offering superior levels of

integration and performance in a single-chip solution. The flexible nature of the UCD3138 makes it

suitable for a wide variety of power conversion applications. In addition, multiple peripherals inside the

device have been specifically optimized to enhance the performance of AC-DC and isolated DC-DC

applications and reduce the solution component count in the IT and network infrastructure space.

The UCD3138 controller is a fully programmable solution offering customers complete control of their

application, along with ample ability to differentiate their solution. At the same time, TI is committed to

simplifying our customers' development effort by offering best-in-class development tools, including

application firmware, Code Composer Studio™ software development environment, and TI’s power

development GUI which lets customers configure and monitor key system parameters.

At the core of the UCD3138 controller are the digital control loop peripherals, also known as Digital Power

Peripherals (DPPs). Each DPP implements a high-speed digital control loop consisting of a dedicated

Error Analog-to-Digital Converter (EADC), a PID-based 2-pole/2-zero digital compensator and DPWM

outputs with 250-ps pulse width resolution. The device also contains a 12-bit, 267-ksps general-purpose

ADC with up to 14 channels, timers, interrupt control, PMBus, and UART communications ports. The

device is based on a 32-bit ARM7TDMI-S RISC microcontroller that performs real-time monitoring,

configures peripherals, and manages communications. The ARM microcontroller executes its program out

of programmable flash memory as well as on-chip RAM and ROM.

In addition to the FDPP, specific power management peripherals have been added to enable high

efficiency across the entire operating range, high integration for increased power density, reliability, and

lowest overall system cost and high flexibility with support for the widest number of control schemes and

topologies. Such peripherals include: light load burst mode, synchronous rectification, LLC and phase-

shifted full bridge mode switching, input voltage feed forward, copper trace current sense, ideal diode

emulation, constant current constant power control, synchronous rectification soft on and off, peak current

mode control, flux balancing, secondary side input voltage sensing, high-resolution current sharing,

hardware-configurable soft start with pre bias, as well as several other features. Topology support has

been optimized for voltage mode and peak current mode controlled phase-shifted full bridge, single and

dual phase PFC, bridgeless PFC, hard-switched full bridge and half bridge, and LLC half bridge and full

bridge.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE

UCD3138

VQFN (64)

9.00 mm × 9.00 mm

VQFN (40)

6.00 mm × 6.00 mm

WQFN (40)

6.00 mm × 6.00 mm

VQFN (40) (2)

6.00 mm × 6.00 mm

UCD3138 Folha de dados(PDF) 2 Page - Texas Instruments

UCD3138 Folha de dados(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89

Folha de dados Download

Ligação URL