MPC8360CVVALDHA datasheet(9/102 Pages) FREESCALE

9 / 102 page

MPC8360E/MPC8358E PowerQUICC II Pro Processor Revision 2.x TBGA Silicon Hardware Specifications, Rev. 5

Freescale Semiconductor

Overall DC Electrical Characteristics

2.1.2

Power Supply Voltage Specification

This table provides the recommended operating conditions for the device. Note that the values in this table are the recommended

and tested operating conditions. Proper device operation outside of these conditions is not guaranteed.

Storage temperature range

TSTG

–55 to 150

° C—

Notes:

1. Functional and tested operating conditions are given in Table 2. Absolute maximum ratings are stress ratings only, and

functional operation at the maximums is not guaranteed. Stresses beyond those listed may affect device reliability or cause

permanent damage to the device.

2. Caution: MVIN must not exceed GVDD by more than 0.3 V. This limit may be exceeded for a maximum of 100 ms during

power-on reset and power-down sequences.

3. Caution: OVIN must not exceed OVDD by more than 0.3 V. This limit may be exceeded for a maximum of 100 ms during

power-on reset and power-down sequences.

4. Caution: LVIN must not exceed LVDD by more than 0.3 V. This limit may be exceeded for a maximum of 100 ms during

power-on reset and power-down sequences.

5. (M,L,O)VIN and MVREF may overshoot/undershoot to a voltage and for a maximum duration as shown in Figure 3.

6. OVIN on the PCI interface may overshoot/undershoot according to the PCI Electrical Specification for 3.3-V operation, as

shown in Figure 4.

Table 2. Recommended Operating Conditions

Characteristic

Symbol

Recommended

Value

Unit

Notes

Core and PLL supply voltage for

MPC8358 Device Part Number with

Processor Frequency label of AD=266MHz and AG=400MHz &

QUICC Engine Frequency label of E=300MHz & G=400MHz

MPC8360 Device Part Number with

Processor Frequency label of AG=400MHz and AJ=533MHz &

QUICC Engine Frequency label of G=400MHz

VDD & AVDD

1.2 V ± 60 mV

1, 3

Core and PLL supply voltage for

MPC8360 Device Part Number with

Processor Frequency label of AL=667MHz and QUICC Engine

Frequency label of H=500MHz

VDD & AVDD

1.3 V ± 50 mV

1, 3

DDR and DDR2 DRAM I/O supply voltage

DDR

DDR2

GVDD

2.5 V ± 125 mV

1.8 V ± 90 mV

V—

Three-speed Ethernet I/O supply voltage

LVDD0

3.3 V ± 330 mV

2.5 V ± 125 mV

V—

Three-speed Ethernet I/O supply voltage

LVDD1

3.3 V ± 330 mV

2.5 V ± 125 mV

V—

Three-speed Ethernet I/O supply voltage

LVDD2

3.3 V ± 330 mV

2.5 V ± 125 mV

V—

Table 1. Absolute Maximum Ratings1 (continued)

Characteristic

Symbol

Max Value

Unit

Notes

MPC8360CVVALDHA Folha de dados(PDF) 9 Page - Freescale Semiconductor, Inc

MPC8360CVVALDHA Folha de dados(HTML) 9 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL