5

dc2365af

DEMO MANUAL DC2365A

Dc590/Dc2026 Quick start proceDure

IMPORTANT! TO AVOID DAMAgE TO THE DC2365A,

MAKE SURE THAT VCCIO (JP6 OF THE DC590, JP3

OF THE DC2026) OF THE DC590/DC2026 IS SET TO

3.3VBEFORECONNECTINgTHEDC590/DC2026TO

THE DC2365A.

To use the DC590/DC2026 with the DC2365A, it is nec-

essary to apply ±16V and ground to the ±16V and GND

terminals of the DC2365A. Connect the DC590/DC2026

to a host PC with a standard USB A/B cable. Connect the

DC2365A to a DC590/DC2026 USB serial controller using

the supplied 14-conductor ribbon cable. Apply a signal

source to J5 and J6. Use J7 to route the signal sources

of J5 and J6 to the desired AIN0–AIN7 inputs. No clock is

required on J1 when using the DC590/DC2026. The clock

signal is provided by the DC590/DC2026.

RuntheQuikEval™software(quikeval.exeversionK108or

later)whichisavailablefromwww.linear.com/designtools/

software. The correct control panel will be loaded au-

tomatically. Click the Collect button (Figure 3) to begin

reading the ADC.

Figure 3. QuikEval Screen Capture