PM7347 datasheet(97/341 Pages) PMC

97 / 341 page

S/UNI®-JET Data Sheet

Released

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use

Document ID: PMC-1990267, Issue 3

Bit

Type

Function

Default

Bit 7

INT

Bit 6

Unused

Bit 5

Unused

Bit 4

Unused

Bit 3

RCLKA

Bit 2

TICLKA

Bit 1

TFCLKA

Bit 0

RFCLKA

The RFCLKA bit monitors for low-to-high transitions on the RFCLK input. RFCLKA is set

low when this register is read and is set high on a rising edge of RFCLK.

TFCLKA

The TFCLKA bit monitors for low-to-high transitions on the TFCLK input. TFCLKA is set

low when this register is read and is set high on a rising edge of TFCLK.

TICLKA

The TICLKA bit monitors for low-to-high transitions on the TICLK input. TICLKA is set

low when this register is read and is set high on a rising edge of TICLK.

RCLKA

The RCLKA bit monitors for low-to-high transitions on the RCLK input. RCLKA is set low

when this register is read and is set high on a rising edge of RCLK.

INT

When the INT bit is set to logic one, the S/UN-JET has generated the interrupt. The particular

block(s) the device that generated the interrupt can be identified by reading the S/UNI-JET

Interrupt Status Register. When the INT bit is set to logic zero, then the device has not

generated an interrupt. Note: The INT bit is valid only in register address 307H.

PM7347 Folha de dados(PDF) 97 Page - PMC-Sierra, Inc