| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MB90F548GPF Folha de dados(PDF) 37 Page - fujitsu semiconductor |
|
|
|||||||||||||||||||||||||||||
MB90F548GPF Folha de dados(HTML) 37 Page - fujitsu semiconductor |
|
37 / 67 page ![]() MB90540/540G/545/545G Series 37 s s s s ELECTRICAL CHARACTERISTICS 1. Absolute Maximum Ratings (VSS = AVSS = 0.0 V) *1 : AVCC, AVRH, AVRL should not exceed VCC. Also, AVRH, AVRL should not exceed AVCC, and AVRL does not exceed AVRH. *2 : VI and VO should not exceed VCC + 0.3 V. VI should not exceed the specified ratings. However if the maximum current to/from an input is limited by some means with external components, the ICLAMP rating supercedes the VI rating. *3 : The maximum output current is a peak value for a corresponding pin. *4 : Average output current is an average current value observed for a 100 ms period for a corresponding pin. *5 : Total average current is an average current value observed for a 100 ms period for all corresponding pins. *6 : •Applicabletopins:P00toP07,P10toP17,P20toP27,P30toP37,P40toP47,P50toP57,P60toP67,P70toP77, P80 to P87, P90 to P97, PA0 • Use within recommended operating conditions. • Use at DC voltage (current) . • The +B signal should always be applied with a limiting resistance placed between the +B signal and the microcontroller. • The value of the limiting resistance should be set so that when the +B signal is applied the input current to the microcontroller pin does not exceed rated values, either instantaneously or for prolonged periods. • Note that when the microcontroller drive current is low, such as in the power saving modes, the +B input potential may pass through the protective diode and increase the potential at the VCC pin, and this may affect other devices. • Note that if a +B signal is input when the microcontroller current is off (not fixed at 0 V) , the power supply is provided from the pins, so that incomplete operation may result. • Note that if the +B input is applied during power-on, the power supply is provided from the pins and the resulting supply voltage may not be sufficient to operate the power-on result. (Continued) Parameter Symbol Value Units Remarks Min Max Power supply voltage VCC VSS − 0.3 VSS + 6.0 V AVCC VSS − 0.3 VSS + 6.0 V VCC = AVCC *1 AVRH, AVRL VSS − 0.3 VSS + 6.0 V AVCC ≥ AVRH/AVRL, AVRH ≥ AVRL *1 Input voltage VI VSS − 0.3 VSS + 6.0 V *2 Output voltage VO VSS − 0.3 VSS + 6.0 V *2 Maximum clamp current ICLAMP − 2.0 + 2.0 mA *6 Total maximum clamp current ∑| ICLAMP | 20 mA *6 “L” level max output current IOL 15 mA *3 “L” level avg. output current IOLAV 4mA *4 “L” level max overall output current ∑IOL 100 mA “L” level avg. overall output current ∑IOLAV 50 mA *5 “H” level max output current IOH −15 mA *3 “H” level avg. output current IOHAV −4mA *4 “H” level max overall output current ∑IOH −100 mA “H” level avg. overall output current ∑IOHAV −50 mA *5 Power consumption PD 500 mW Flash device 400 mW Mask ROM Operating temperature TA −40 +85 °C MB90F543/F549 −40 +105 °C Other than MB90F543/F549 Storage temperature TSTG −55 +150 °C |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |