CD5.242

CD-Series

DC/DC Converter 24V, 5A

12. EMC

The DC/DC converter is suitable for applications in industrial environment as well as in residential, commercial and

light industry environment without any restrictions.

EMC Immunity

Generic standards: EN 61000-6-1 and EN 61000-6-2

Electrostatic discharge

EN 61000-4-2

Contact discharge

Air discharge

8kV

15kV

Criterion A

Criterion A

Electromagnetic RF field

EN 61000-4-3

80MHz-2.7GHz

10V/m

Criterion A

Fast transients (Burst)

EN 61000-4-4

Input lines

Output lines

4kV

2kV

Criterion A

Criterion A

Surge voltage on input

EN 61000-4-5

+

-

1kV

Criterion A

+/-

chassis ground

2kV

Criterion A

Surge voltage on output

EN 61000-4-5

+

-

+ / -

chassis ground

500V

1kV

Criterion A

Criterion A

Conducted disturbance

EN 61000-4-6

0.15-80MHz

10V

Criterion A

Criterions:

A:

DC/DC converter shows normal operation behavior within the defined limits.

C:

Temporary loss of function is possible. DC/DC converter may shut-down and restarts by itself. No damage or hazards for the DC/DC

converter will occur.

EMC Emission

Generic standards: EN 61000-6-3 and EN 61000-6-4

Conducted emission

IEC/CISPR 16-1-2, IEC/CISPR 16-2-1

Class B, input lines

(Limits for DC power ports)

Radiated emission

EN 55011, EN 55022

Class B

This device complies with FCC Part 15 rules.

Operation is subjected to following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

Switching frequency

Variable between 90kHz and 140kHz depending on load and input voltage

(output current > 0.5A)

Mar. 2016 / Rev. 1.5 DS-CD5.242-EN

All parameters are specified at 24V, 5A, 48Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

11/22