| Os motores de busca de Datasheet de Componentes eletrônicos |
|
PS081 Folha de dados(PDF) 61 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
PS081 Folha de dados(HTML) 61 Page - ams AG |
|
61 / 155 page ![]() acam-messelectronic gmbh - Friedrich-List-Str.4 - D-76297 Stutensee-Blankenloch - Germany - www.acam.de 4-4 1 PSØ81 4.2.2 LCD-Power supply The PSØ81 has an integrated charge pump to double and stabilize the voltage for driving 3 V and 2.5 V LCD displays. 2 V displays need no voltage doubling. The choice for the external capacitors depends on the size or capacitance of the display. Configuration: Register 11: lcd_standby, lcd_vlt Register 16: en_noise_lcd, lcd_direct_drive, use_10kHz_lcd Register 17: lcd_pulsed, c10_div_lcd lcd_standby The display has a stand-by mode. I this mode the display is switched off, but the voltage generation is switched high resistive. So it is possible to switch on the display very fast. This might be helpful in auto-on mode. = 0 LDC on = 1 Standby lcd_vlt[1:0] Selection of LCD supply voltage = 0 2.0 V = 1 2.5 V = 2 3.0 V = 3 2.0 V without voltage doubling lcd_directdrive LCD direct drive selection = 0 off = 1 LCD is driven directly from Vcc without regulation and charge pump. This reduces the LCD current and should be used in solar applications. lcd_dis_chargm 1 = Suppresses the recharging of the charge pump capacitors during a measurement. This option is reasonable only in stretched modes (here it is recommended) and single conversion mode (at low internal avera- ging (avrate < 10), the time between measurements must be sufficient to recharge the capacitors, duty 1:3). This option works only in combination with a pulsed 4 MHz oscillator use_10kHz_lcd 1 = Select the low power 10 kHz oscillator for the LCD charge pump. 1 = recommended 0 = Charge pump clock derived from 4 MHz, divider can be set in the ran- ge 480 to 512. The selection avoids a fixed relation between charge pump and measurement and therefore reduced distortions of the mea- surement. c10_div_lcd[5:0] 5 bit divider factor for deriving the 10kHz from the 4 MHz in continuous mode. Member of the ams Group |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |