| Os motores de busca de Datasheet de Componentes eletrônicos |
|
HD64F2149YV Folha de dados(PDF) 430 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD64F2149YV Folha de dados(HTML) 430 Page - Renesas Technology Corp |
|
430 / 1075 page ![]() Section 13 Timer Connection Rev. 3.00 Jan 18, 2006 page 402 of 1044 REJ09B0280-0300 13.3.5 IVI Signal Fall Modification and IHI Synchronization By using the timer connection TMR1, the fall of the IVI signal can be shifted backward by the specified number of IHI signal waveforms. Also, the fall of the IVI signal can be synchronized with the rise of the IHI signal. To perform 8-bit timer divided waveform period measurement, TCNT in TMR1 is set to count external clock (IHI signal) pulses, and to be cleared on the rising edge of the external reset signal (inverse of the IVI signal). The number of IHI signal pulses until the fall of the IVI signal is written in TCORB. Since the IVI signal supplied to the IVO signal selection circuit is normally set on the rise of the IVI signal and reset on the fall, its waveform is the same as that of the original IVI signal. When fall modification is selected, a reset is performed on a TMR1 TCORB compare-match. The fall of the waveform generated in this way can be synchronized with the rise of the IHI signal, regardless of whether or not fall modification is selected. Examples of TMR1 TCORB, TCR, and TCSR settings are shown in table 13.7, and the fall modification/IHI synchronization timing chart is shown in figure 13.7. Table 13.7 Examples of TCR, TCSR, and TCORB Settings Register Bit(s) Abbreviation Contents Description 7CMIEB 0 6CMIEA 0 5OVIE 0 Interrupts due to compare-match and overflow are disabled 4 and 3 CCLR1, CCLR0 11 TCNT is cleared by the rising edge of the external reset signal (inverse of the IVI signal) TCR in TMR1 2 to 0 CKS2 to CKS0 101 TCNT is incremented on the rising edge of the external clock (IHI signal) TCSR in TMR1 3 to 0 OS3 to OS0 0011 1001 Not changed by compare-match B; output inverted by compare-match A (toggle output) or when TCORB ≤ TCORA, 1 output on compare-match B, 0 output on compare- match A TCORB in TMR1 H'03 (example) Compare-match on the 4th (example) rise of the IHI signal after the rise of the inverse of the IVI signal |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |