R5F56517FDFM datasheet(6/188 Pages) RENESAS

6 / 188 page

RX65N Group, RX651 Group

1. Overview

R01DS0276EJ0240 Rev.2.40

Page 6 of 188

Oct 31, 2023

Timers

16-bit timer pulse unit

(TPUa)

 (16 bits × 6 channels) × 1 unit

 Maximum of 16 pulse-input/output possible

 Select from among seven or eight counter-input clock signals for each channel

 Input capture/output compare function

 Output of PWM waveforms in up to 15 phases in PWM mode

 Support for buffered operation, phase-counting mode (two phase encoder input) and

cascade-connected operation (32 bits × 2 channels) depending on the channel.

 PPG output trigger can be generated

 Capable of generating conversion start triggers for the A/D converters

 Digital filtering of signals from the input capture pins

 Event linking by the ELC

Multifunction timer pulse

unit (MTU3a)

 9 channels (16 bits × 8 channels, 32 bits × 1 channel)

 Maximum of 28 pulse-input/output and 3 pulse-input possible

 Select from among 14 counter-input clock signals for each channel (PCLKA/1, PCLKA/

2, PCLKA/4, PCLKA/8, PCLKA/16, PCLKA/32, PCLKA/64, PCLKA/256, PCLKA/1024,

MTCLKA, MTCLKB, MTCLKC, MTCLKD, MTIOC1A)

14 of the signals are available for channel 0, 11 are available for channels 1, 3, 4, 6 to 8,

12 are available for channel 2, and 10 are available for channel 5.

 Input capture function

 39 output compare/input capture registers

 Counter clear operation (synchronous clearing by compare match/input capture)

 Simultaneous writing to multiple timer counters (TCNT)

 Simultaneous register input/output by synchronous counter operation

 Buffered operation

 Support for cascade-connected operation

 43 interrupt sources

 Automatic transfer of register data

 Pulse output mode

Toggle/PWM/complementary PWM/reset-synchronized PWM

 Complementary PWM output mode

Outputs non-overlapping waveforms for controlling 3-phase inverters

Automatic specification of dead times

PWM duty cycle: Selectable as any value from 0% to 100%

Delay can be applied to requests for A/D conversion.

Non-generation of interrupt requests at peak or trough values of counters can be

selected.

Double buffer configuration

 Reset synchronous PWM mode

Three phases of positive and negative PWM waveforms can be output with desired duty

cycles.

 Phase-counting mode: 16-bit mode (channels 1 and 2); 32-bit mode (channels 1 and 2)

 Counter functionality for dead-time compensation

 Generation of triggers for A/D converter conversion

 A/D converter start triggers can be skipped

 Digital filter function for signals on the input capture and external counter clock pins

 PPG output trigger can be generated

 Event linking by the ELC

Port output enable 3

(POE3a)

 Control of the high-impedance state of the MTU3 waveform output pins

 5 pins for input from signal sources: POE0#, POE4#, POE8#, POE10#, POE11#

 Initiation on detection of short-circuited outputs (detection of simultaneous PWM output

to the active level)

 Initiation by oscillation-stoppage detection or software

 Additional programming of output control target pins is enabled

Programmable pulse

generator (PPG)

 (4 bits × 4 groups) × 2 units

 Pulse output with the MTU3 or TPU output as a trigger

 Maximum of 32 pulse-output possible

Table 1.1

Outline of Specifications (5/10)

Classification

Module/Function

Description

R5F56517FDFM Folha de dados(PDF) 6 Page - Renesas Technology Corp

R5F56517FDFM Folha de dados(HTML) 6 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL