R5F56517FDFM datasheet(4/188 Pages) RENESAS

4 / 188 page

RX65N Group, RX651 Group

1. Overview

R01DS0276EJ0240 Rev.2.40

Page 4 of 188

Oct 31, 2023

Low power

consumption

Low power consumption

function

 Module stop function

 Four low power consumption modes

Sleep mode, all-module clock stop mode, software standby mode, and deep software

standby mode

Battery backup function

 When the voltage on the VCC pin drops, battery power from the VBATT pin is supplied

to keep the real-time clock (RTC) operating.

Interrupt

Interrupt controller

(ICUB)

 Peripheral function interrupts: 262 sources

 External interrupts: 16 (pins IRQ0 to IRQ15)

 Software interrupts: 2 sources

 Non-maskable interrupts: 7 sources

 Sixteen levels specifiable for the order of priority

 Method of interrupt source selection:

The interrupt vectors consist of 256 vectors (128 sources are fixed. The remaining 128

vectors are selected from among the other 123 sources.)

External bus extension

 The external address space can be divided into eight areas (CS0 to CS7), each with

independent control of access settings.

Capacity of each area: 16 Mbytes (CS0 to CS7)

A chip-select signal (CS0# to CS7#) can be output for each area.

Each area is specifiable as an 8-, 16-, or 32-bit bus space.

The data arrangement in each area is selectable as little or big endian (only for data).

 SDRAM interface connectable

 Bus format: Separate bus, multiplex bus

 Wait control

 Write buffer facility

DMA

DMA controller

(DMACAa)

 8 channels

 Three transfer modes: Normal transfer, repeat transfer, and block transfer

 Activation sources: Software trigger, external interrupts, and interrupt requests from

peripheral functions

EXDMA controller

(EXDMACa)

 2 channels

Four transfer modes: Normal transfer, repeat transfer, block transfer, and cluster

transfer

 Single-address transfer enabled with the EDACKn signal

 Request sources: Software trigger, external DMA requests (EDREQn), and interrupt

requests from peripheral functions

Data transfer controller

(DTCb)

 Three transfer modes: Normal transfer, repeat transfer, and block transfer

 Request sources: External interrupts and interrupt requests from peripheral functions

 Sequence transfer

Table 1.1

Outline of Specifications (3/10)

Classification

Module/Function

Description

R5F56517FDFM Folha de dados(PDF) 4 Page - Renesas Technology Corp

R5F56517FDFM Folha de dados(HTML) 4 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL