Data Sheet

ADP151

Ultralow Noise, 200 mA, CMOS Linear Regulator

Rev. J

DOCUMENT FEEDBACK

TECHNICAL SUPPORT

Information furnished by Analog Devices is believed to be accurate and reliable "as is". However, no responsibility is assumed by Analog

Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to

change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and

registered trademarks are the property of their respective owners.

FEATURES

►

Ultralow noise: 9 µV rms

►

No noise bypass capacitor required

►

Stable with 1 µF ceramic input and output capacitors

►

Maximum output current: 200 mA

►

Input voltage range: 2.2 V to 5.5 V

►

Low quiescent current

►

IGND = 10 µA with IOUT = 0 µA

►

IGND = 265 μA with IOUT = 200 mA

►

Low shutdown current: <1 µA

►

Low dropout voltage: 135 mV at IOUT = 200 mA

►

Initial accuracy: ±1%

►

Accuracy over line, load, and temperature: ±2.5%

►

16 fixed output voltage options: 1.1 V to 3.3 V

►

PSRR performance of 70 dB at 10 kHz

►

Current-limit and thermal overload protection

►

Logic controlled enable

►

Internal pull-down resistor on EN input

►

5-lead TSOT package

►

6-lead LFCSP package

►

4-ball, 0.4 mm pitch WLCSP

►

AEC-Q100 qualified for automotive applications

APPLICATIONS

►

RF, voltage controlled oscillator (VCO), and phase locked loop

(PLL) power supplies

►

Mobile phones

►

Digital camera and audio devices

►

Portable and battery-powered equipment

►

Post dc-to-dc regulation

►

Portable medical devices

►

Automotive

TYPICAL APPLICATION CIRCUITS

Figure 1. TSOT ADP151 with Fixed Output Voltage, 1.8 V

Figure 2. WLCSP ADP151 with Fixed Output Voltage, 1.8 V

Figure 3. LFCSP ADP151 with Fixed Output Voltage, 1.8 V

GENERAL DESCRIPTION

The ADP151 is an ultralow noise, low dropout (LDO) linear regula-

tor that operates from 2.2 V to 5.5 V and provides up to 200 mA

of output current. The low 135 mV dropout voltage at 200 mA load

improves efficiency and allows operation over a wide input voltage

range.

Using an innovative circuit topology, the ADP151 achieves ultralow

noise performance without the necessity of a bypass capacitor,

making the device ideal for noise sensitive analog and RF appli-

cations. The ADP151 also achieves ultralow noise performance

without compromising the power supply rejection ratio (PSRR) or

transient line and load performance. The low 265 μA of operating

supply current at 200 mA load makes the ADP151 suitable for

battery-operated portable equipment.

The ADP151 includes an internal pull-down resistor on the EN

input.

The ADP151 is specifically designed for stable operation with

tiny 1 µF, ±30% ceramic input and output capacitors to meet the

requirements of high performance, space constrained applications.

The ADP151 is capable of 16 fixed output voltage options, ranging

from 1.1 V to 3.3 V.

Short-circuit and thermal overload protection circuits prevent dam-

age in adverse conditions. The ADP151 is available in tiny 5-lead

TSOT, 6-lead LFCSP, and 4-ball, 0.4 mm pitch, halide-free WLCSP

packages for the smallest footprint solution to meet a variety of

portable power application requirements.