EM6607 datasheet(12/47 Pages) EMMICRO

12 / 47 page

EM6607

www.emmicroelectronic.com

Oscillator

A built-in crystal oscillator circuit generates the system-operating clock for the CPU and peripheral circuits from an externally

connected crystal (typ. 32.768kHz) and trimmer capacitor (from Qin tw. VSS). The regulated voltage, VREG, supplies the

oscillator circuit. In SLEEP mode the oscillator is stopped.

With Fout bit in PA3cnt register we can put the system 32.768 Hz frequency on STB/RST pin as output.

5.1

Prescaler

The input to the prescaler is the system clock signal. The

prescaler consists of a fifteen (15) element divider chain

which delivers clock signals for the peripheral circuits such

as the timer/counter, buzzer, I/O debouncers and edge

detectors, as well as generating prescaler interrupts.

Table 8.

Prescaler interrupts source

Interrupt frequency

PSF1

PSF0

mask(no interrupt)

1 Hz

8 Hz

32 Hz

The frequency of prescaler interrupts is software selectable, as shown in Table 8.

Table 9.

Prescaler control register - PRESC

Bit

Name

Reset

R/W

Description

MTim

R/W

Timer/Counter Interrupt Mask

PRST

R/W

Prescaler reset

PSF1

R/W

Prescaler Interrupt select 1

PSF0

R/W

Prescaler Interrupt select 0

Watchdog timer

If for any reason the CPU crashes, then the watchdog timer can detect this situation and output a system reset signal. This

function can be used to detect program overrun. For normal operation the watchdog timer must be reset periodically by

software at least once every three seconds (CLK = 32kHz) or a system reset signal is generated to CPU and periphery. The

watchdog is active during STANDBY. Setting the NoWD bit to 1 in the Option register deactivates the watchdog-reset function.

In worst case because of prescaler reset function WD time-out can come down to 2 seconds.

Writing 1 to the WDRST bit resets the watchdog timer. Writing 0 to WDRST has no effect.

The watchdog timer also operates in STANDBY mode. It is therefore necessary to reset it if this mode continues for more than

three seconds. One method to do so is to use the prescaler 1Hz interrupt such, that the watchdog is reset every second.

Table 10.

Watchdog register - WD

Bit

Name

Reset

R/W

Description

WDRST

R/W

Watchdog timer reset

Slmask

R/W

SLEEP mask bit

WD1

WD Timer data 1/4 Hz

WD0

WD Timer data 1/2 Hz

EM6607 Folha de dados(PDF) 12 Page - EM Microelectronic - MARIN SA

EM6607 Folha de dados(HTML) 12 Page - EM Microelectronic - MARIN SA

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Folha de dados Download

Ligação URL