AS3956 datasheet(69/107 Pages) AMSCO

69 / 107 page

ams Datasheet

Page 69

[v1-11] 2018-Nov-14

Document Feedback

AS3956 − Detailed Description

I²C Interface

Communication between AS3956 and microcontroller can be

done via a I²C interface and an additional interrupt signal

(pin IRQ). Please note a 100k ohm pull down resistor is

recommended to be connected to the IRQ pin to prevent IRQ

from floating when /SS is high. AS3956 acts an I²C slave device,

and supports single master, multiple slave configurations.

AS3956 I²C supports following modes: Standard-mode,

Fast-mode, Fast-mode Plus. In addition to Schmitt triggers on

all digital input lines a glitch suppression filter is implemented

on the SCL and SDA input lines and suppresses glitches up to

Tgs_i2c in length.

Figure 68:

I²C and Interrupt Signals

During I²C communication, the signal /SS should be set to low.

By setting the /SS to low, I²C interface is enabled. It is

recommended to keep signal /SS high whenever the I²C

interface is not used. The I²C bus is reset when /SS is high.

I²C interface supports the following modes:

• Internal registers read and write

• EEPROM read and write

• Buffer read and write

• Direct commands

Please note that the only I²C operations allowed, when logic

and EEPROM are supplied from VP_IO, are EEPROM and registers

reading and writing (see also Power Management).

Name

Signal

Signal Level

Description

/SS

Digital Input with pull-up

CMOS

Should be set to low during I²C communication

SDA

Digital Output

CMOS

Serial data output

SCL

Digital Input

CMOS

Clock for serial communication

IRQ

Digital Output

CMOS

Interrupt output pin (active high)

AS3956 Folha de dados(PDF) 69 Page - ams AG

AS3956 Folha de dados(HTML) 69 Page - ams AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL