STM32MP157F datasheet(59/260 Pages) STMICROELECTRONICS

59 / 260 page

DS12505 Rev 5

59/260

STM32MP157C/F

Functional overview

hash filter, Layer 3 filtering on IP source (SA) or destination (DA) address, Layer 4

filtering on source (SP) or destination (DP) port

–

Double VLAN processing: insertion of up to two VLAN tags in transmit path, tag

filtering in receive path

–

IEEE 1588-2008/PTPv2 support

–

Supports network statistics with RMON/MIB counters (RFC2819/RFC2665)

•

Hardware offload processing

–

Preamble and start-of-frame data (SFD) insertion or deletion

–

Integrity Checksum offload engine for IP header and TCP/UDP/ICMP payload:

transmit checksum calculation and insertion, receive checksum calculation and

comparison

–

Automatic ARP request response with the device's MAC address

–

TCP Segmentation: Automatic split of large transmit TCP packet into multiple

small packets

•

Low-power mode

–

Energy efficient Ethernet (Standard IEEE 802.3az-2010)

–

Remote wakeup packet and AMD Magic Packet™ detection

3.50

High-definition multimedia interface (HDMI) – Consumer

electronics control (CEC)

The device embeds a HDMI-CEC controller that provides hardware support for the

consumer electronics control (CEC) protocol (supplement 1 to the HDMI standard).

This protocol provides high-level control functions between all audiovisual products in an

environment. It is specified to operate at low speeds with minimum processing and memory

overhead. It has a clock domain independent from the CPU clock, allowing the HDMI-CEC

controller to wake up the STM32MP157C/F from Stop mode on data reception.

3.51

Debug infrastructure

The devices offer a comprehensive set of debug and trace features to support software

development and system integration.

•

Breakpoint debugging

•

Code execution tracing

•

Software instrumentation

•

JTAG debug port

•

Serial-wire debug port

•

Trigger input and output

•

Serial-wire trace port

•

Trace port

•

Arm® CoreSight™ debug and trace components

The debug can be controlled via a JTAG/serial-wire debug access port, using industry

standard debugging tools.

A trace port allows data to be captured for logging and analysis.

STM32MP157F Folha de dados(PDF) 59 Page - STMicroelectronics

STM32MP157F Folha de dados(HTML) 59 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL