| Os motores de busca de Datasheet de Componentes eletrônicos |
|
MT7697DN Folha de dados(PDF) 38 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
MT7697DN Folha de dados(HTML) 38 Page - List of Unclassifed Manufacturers |
|
38 / 84 page ![]() MT7697D Internet-of-Things Wireless Connectivity © 2016 MediaTek Inc. Page 38 of 84 This document contains information that is proprietary to MediaTek Inc. (“MediaTek”) and/or its licensor(s). Any unauthorized use, reproduction or disclosure of this document in whole or in part is strictly prohibited. 2.4.12 SYSRAM_CM4 SYSRAM, the internal SRAM, is mapped on the system bus interface of Cortex-M4. M4 can carry out instruction fetches and data accesses to the SYSRAM. SYSRAM is the internal SRAM that the DMA engine can access. It can be used as a GDMA or VFIFO buffer, the source and the destination of GDMA controller, for memory-to-memory transfer as well the transfer between memory and peripherals. 2.4.13 Crypto engine The crypto engine supports AES, DES, and 3DES encryption and decryption engine. SHA256, SHA512 and MD5 hash engines. 2.5 Peripherals Several peripheral are multiplexed GPIOs. MT7697D has two dedicated UART interfaces with flow control, one dedicated I2C interface, and one dedicated IrDA interface. MT7697D also has the 2nd I2C interface, the SPI slave interface, the I2S interface, and the SPI master interface, but only 2 of the above interfaces can be effective at a time. The section describes the function of all the peripherals. 2.5.1 GPIO Interface 2.5.1.1 GPIO Function There are two types of GPIO (General purpose IO) designs in MT7697D: GPIO and AGPIO. Floating-well design is used in GPIO and AGPIO. It prevents potential leakage problem when the DVDD33 power supply is not enabled but the pin input is pulled up to 3.3V source. MT7697D offers GPIO, each with the following configuration options: Input / Output mode Slew rate control Schmitt trigger hysteresis control Input mode: Floating (Hi-Z), pull-up, or pull-down Output mode: Active driving, or open drain Pull up/down control. The pull-up and pull-down resistance is 75KΩ with ±20% variation over PVT condition Driving strength: 4mA, 8mA, 12mA, 16mA Input and output duty cycle tuning |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |