STM32L162VC datasheet(28/123 Pages) STMICROELECTRONICS

28 / 123 page

Functional overview

STM32L162VC, STM32L162RC

28/123

DocID022881 Rev 10

3.17.1

General-purpose timers (TIM2, TIM3, TIM4, TIM5, TIM9, TIM10 and

TIM11)

There are seven synchronizable general-purpose timers embedded in the STM32L162xC

devices (see Table 7 for differences).

TIM2, TIM3, TIM4, TIM5

TIM2, TIM3, TIM4 are based on 16-bit auto-reload up/down counter. TIM5 is based on a 32-

bit auto-reload up/down counter. They include a 16-bit prescaler. They feature four

independent channels each for input capture/output compare, PWM or one-pulse mode

output. This gives up to 16 input captures/output compares/PWMs on the largest packages.

TIM2, TIM3, TIM4, TIM5 general-purpose timers can work together or with the TIM10,

TIM11 and TIM9 general-purpose timers via the Timer Link feature for synchronization or

event chaining. Their counter can be frozen in debug mode. Any of the general-purpose

timers can be used to generate PWM outputs.

TIM2, TIM3, TIM4, TIM5 all have independent DMA request generation.

These timers are capable of handling quadrature (incremental) encoder signals and the

digital outputs from 1 to 3 hall-effect sensors.

TIM10, TIM11 and TIM9

TIM10 and TIM11 are based on a 16-bit auto-reload upcounter. TIM9 is based on a 16-bit

auto-reload up/down counter. They include a 16-bit prescaler. TIM10 and TIM11 feature one

independent channel, whereas TIM9 has two independent channels for input capture/output

compare, PWM or one-pulse mode output. They can be synchronized with the TIM2, TIM3,

TIM4, TIM5 full-featured general-purpose timers.

They can also be used as simple time bases and be clocked by the LSE clock source

(32.768 kHz) to provide time bases independent from the main CPU clock.

3.17.2

Basic timers (TIM6 and TIM7)

These timers are mainly used for DAC trigger generation. They can also be used as generic

16-bit time bases.

3.17.3

SysTick timer

This timer is dedicated to the OS, but could also be used as a standard downcounter. It is

based on a 24-bit downcounter with autoreload capability and a programmable clock

source. It features a maskable system interrupt generation when the counter reaches 0.

3.17.4

Independent watchdog (IWDG)

The independent watchdog is based on a 12-bit downcounter and 8-bit prescaler. It is

clocked from an independent 37 kHz internal RC and, as it operates independently of the

main clock, it can operate in Stop and Standby modes. It can be used either as a watchdog

to reset the device when a problem occurs, or as a free-running timer for application timeout

management. It is hardware- or software-configurable through the option bytes. The counter

can be frozen in debug mode.

STM32L162VC Folha de dados(PDF) 28 Page - STMicroelectronics

STM32L162VC Folha de dados(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL