EM357-RTR datasheet(152/241 Pages) SILABS

Nome de Peças	EM357-RTR

Descrição Electrónicos	High-Performance, Integrated ZigBee/802.15.4 System-on-Chip

PDF	241 Pages

Scroll/Zoom	100%

Fabricante Electrônico	SILABS [Silicon Laboratories]

Página de início	http://www.silabs.com

Logo

152 / 241 page

Rev 1.3

152

TIM_CC2G

[2]

Capture/Compare 2 Generation.

0: Does nothing.

1: If CC2 configured as output channel:

The TIM_CC2IF flag is set.

If CC2 configured as input channel:

The TIM_CC2IF flag is set.

The INT_TIMMISSCC2IF flag is set if the TIM_CC2IF flag was already high.

The current value of the counter is captured in TMRx_CCR2 register.

TIM_CC1G

[1]

Capture/Compare 1 Generation.

0: Does nothing.

1: If CC1 configured as output channel:

The TIM_CC1IF flag is set.

If CC1 configured as input channel:

The TIM_CC1IF flag is set.

The INT_TIMMISSCC1IF flag is set if the TIM_CC1IF flag was already high.

The current value of the counter is captured in TMRx_CCR1 register.

TIM_UG

[0]

Update Generation.

0: Does nothing.

1: Re-initializes the counter and generates an update of the registers. This also

clears the prescaler counter but the prescaler ratio is not affected. The counter is

cleared if center-aligned mode is selected or if TIM_DIR=0 (up-counting), other-

wise it takes the auto-reload value (TMR1_ARR) if TIM_DIR=1 (down-counting).

Bitname

Bitfield Access

Description

EM357-RTR Folha de dados(PDF) 152 Page - Silicon Laboratories