WTS701MMSLASHT datasheet(30/77 Pages) WINBOND

30 / 77 page

WTS701

- 30 -

IDLE

This command is executed after the receipt of an end-of-conversion interrupt (ICNV) has occurred.

The IDLE command will deactivate all audio outputs and bring the device to the IDLE state.

IDLE

Class

Type

Host controller

0x57

0x00

Byte Sequence:

WTS701

Status Byte 0

Status Byte 1

Description:

Put WTS701 in IDLE state.

RDST

READ STATUS

The Read Status command reads the status word of the device. If two dummy data bytes are also

sent, the contents of the byte count register are also returned. Refer to subsections 7.3.2 and 7.3.4 for

more information regarding the STATUS register and BCNT register.

RDST

Class

Type

Host controller

0x04

0x00

Byte Sequence:

WTS701

Status Byte 0

Status Byte 1

BCNT

BCNT0

Description:

Read Status word of the device.

RVER

READ VERSION

The Read version command reads the WTS701 version information. The software version information

is only valid when the device is powered up.

RVER

Class

Type

Host controller

0x12

0x00

Byte Sequence:

WTS701

Status Byte 0

Status Byte 1

HW VER

SW VER

Description:

Read WTS701 Software and Hardware versions.

WTS701MM/T Folha de dados(PDF) 30 Page - Winbond

WTS701MM/T Folha de dados(HTML) 30 Page - Winbond

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77

Folha de dados Download

Ligação URL