WTS701MMSLASHT datasheet(13/77 Pages) WINBOND

Nome de Peças	WTS701MM/T

Descrição Electrónicos	WINBOND SINGLE-CHIP TEXT-TO-SPEECH PROCESSOR

PDF	77 Pages

Scroll/Zoom	100%

Fabricante Electrônico	WINBOND [Winbond]

Página de início	http://www.winbond.com

Logo

13 / 77 page

WTS701

Publication Release Date: May 2003

- 13 -

Revision 3.09

7.2 PHYSICAL INTERFACE

The following sections describe the physical pin properties and the timing associated with the physical

interface to the device. Note that all input pins are 3V and 5V tolerant, except for the CS signal

which is only 3V tolerant.

7.2.1 Clocking Requirements

The WTS701 processor can receive its clock from either an external clock source or a crystal

oscillator. The XTAL1 and XTAL2 pins provide the crystal interface to the device. The clock to the

WTS701 processor is configured by a clock configuration register, which must be set by the host

processor during the initialization phase. Figure 6 below shows how to connect the WTS701 to a

crystal oscillator. An external clock can be connected to the WTS701 providing the clock source for

the system, as shown in Figure 6.

WTS701

XTAL1

XTAL2

WTS701

XTAL1

XTAL2

CLK IN

C1 = C2 = 15pF

X1 = 24.576MHz

Figure 6. Clock Generation.

Suggested Crystal Specification:

F = 24.576 MHz Fundamental Mode Operation

CL = 16 pF

ESR = 60 Ω maximum

WTS701MM/T Folha de dados(PDF) 13 Page - Winbond