STM32L052C8 datasheet(30/136 Pages) STMICROELECTRONICS

30 / 136 page

Functional overview

STM32L052x6 STM32L052x8



30/136

DocID025936 Rev 6

3.14

Ultra-low-power comparators and reference voltage

The STM32L052x6/8 embed two comparators sharing the same current bias and reference

voltage. The reference voltage can be internal or external (coming from an I/O).



One comparator with ultra low consumption



One comparator with rail-to-rail inputs, fast or slow mode.



The threshold can be one of the following:

–

DAC output

–

External I/O pins

–

Internal reference voltage (VREFINT)

–

submultiple of Internal reference voltage(1/4, 1/2, 3/4) for the rail to rail

comparator.

Both comparators can wake up the devices from Stop mode, and be combined into a

window comparator.

The internal reference voltage is available externally via a low-power / low-current output

buffer (driving current capability of 1 µA typical).

3.15

System configuration controller

The system configuration controller provides the capability to remap some alternate

functions on different I/O ports.

The highly flexible routing interface allows the application firmware to control the routing of

different I/Os to the TIM2, TIM21, TIM22 and LPTIM timer input captures. It also controls the

routing of internal analog signals to the USB internal oscillator, ADC, COMP1 and COMP2

and the internal reference voltage VREFINT.

3.16

Touch sensing controller (TSC)

The STM32L052x6/8 provide a simple solution for adding capacitive sensing functionality to

any application. These devices offer up to 24 capacitive sensing channels distributed over 8

analog I/O groups.

Capacitive sensing technology is able to detect the presence of a finger near a sensor which

is protected from direct touch by a dielectric (such as glass, plastic). The capacitive variation

introduced by the finger (or any conductive object) is measured using a proven

implementation based on a surface charge transfer acquisition principle. It consists of

charging the sensor capacitance and then transferring a part of the accumulated charges

into a sampling capacitor until the voltage across this capacitor has reached a specific

threshold. To limit the CPU bandwidth usage, this acquisition is directly managed by the

hardware touch sensing controller and only requires few external components to operate.

The touch sensing controller is fully supported by the STMTouch touch sensing firmware

library, which is free to use and allows touch sensing functionality to be implemented reliably

in the end application.

STM32L052C8 Folha de dados(PDF) 30 Page - STMicroelectronics

STM32L052C8 Folha de dados(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL