UCS1003-3 datasheet(56/138 Pages) MICROCHIP

56 / 138 page

UCS1003-1/2/3

DS20005346B-page 56

 2014-2015 Microchip Technology Inc.

9.9

Current Limit Mode Associations

The UCS1003-1/2/3 will close the port power switch and

use the Current-Limiting mode, as shown in Table 9-2.

TABLE 9-2:

CURRENT LIMIT MODE OPTIONS

Active Mode

Current Limit Mode

(See Section 10.14 “Current-Limiting Behavior

Configuration Registers”)

Data Pass-Through

Trip mode

BC1.2 SDP

Trip mode

BC1.2 CDP

CC mode if ILIM < 1.68A; otherwise, Trip mode

BC1.2 DCP

CC mode if ILIM < 1.68A; otherwise, Trip mode

DCE Cycle Mode

UCS1003-1

During DCE Cycle, when a charger emulation profile is

being applied and the emulation time-out is active

CC mode if ILIM < 1.68A; otherwise, Trip mode

BC1.2 DCP charger emulation profile accepted or the

emulation time-out is disabled

CC mode if ILIM < 1.68A; otherwise, Trip mode

Legacy 2 charger emulation profile accepted or the

emulation time-out is disabled

CC mode if ILIM < 1.68A; otherwise, Trip mode

Legacy 1 or Legacy 3 – Legacy 7 charger emulation

profile accepted or the emulation time-out is disabled

Trip mode if IBUS_R2MIN < ILIM or ILIM > 1.68A

(normal operation); otherwise, CC mode

(see Register 10-49)(Note 1)

Custom charger emulation profile accepted or the

emulation time-out is disabled

Trip mode if IBUS_R2MIN < ILIM or ILIM > 1.68A

(normal operation); otherwise, CC mode

(see Register 10-49)(Note 1)

No handshake

(DCE Cycle with emulation retry not enabled)

Trip mode if IBUS_R2MIN < ILIM or ILIM > 1.68A

(normal operation); otherwise, CC mode

(see Register 10-49)(Note 1)

UCS1003-2/3

During DCE Cycle, when a charger emulation profile is

being applied and the emulation time-out is active

CC mode if ILIM < 1.68A; otherwise, Trip mode

Legacy 3 charger emulation profile accepted

CC mode if ILIM < 1.68A; otherwise, Trip mode

Legacy 1, Legacy 2 or Legacy 4 – Legacy 7 charger

emulation profile accepted

Trip mode

Note 1:

In the case of UCS1003-1, under these specific conditions with ILIM < 1.68A, it is the relationship of ILIM

and IBUS_R2MIN that determines the Current-Limiting mode. In these cases, the value of IBUS_R2MIN is

determined by the CS_R2_IMIN<2:0> bits, Custom Current-Limiting Behavior Configuration<4:2>

(Register 10-49).

UCS1003-3 Folha de dados(PDF) 56 Page - Microchip Technology

UCS1003-3 Folha de dados(HTML) 56 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL