UCD3138064RGZR datasheet(56/91 Pages) TI1

56 / 91 page

UCD3138064

SLUSB72B – MARCH 2013 – REVISED SEPTEMBER 2014

www.ti.com

Address

Size

Module

0xFFFF_FF20 - 0xFFFF_FF37

CIM

0xFFFF_FF40 - 0xFFFF_FF50

PSA

0xFFFF_FFD0 - 0xFFFF_FFEC

SYS

The registers and bit definitions inside the System and Peripheral blocks are detailed in the programmer’s

guide for each peripheral.

6.5.1.2

Boot ROM

The UCD3138064 incorporates a 8 kB boot ROM. This boot ROM includes support for:

•

Program download through the PMBus

•

Device initialization

•

Examining and modifying registers and memory

•

Verifying and executing program flash automatically

•

Jumping to a customer defined boot program

•

Checksum evaluation to facilitate program execution from either Program Flash 1 or Program Flash 2

The Boot ROM is entered automatically on device reset. It initializes the device and then performs

checksums on the program flash. If the first 2 kB of either program FLASH has a valid checksum, the

program branches to location 0 in the appropriate Program FLASH module. This permits the use of a

custom boot program. If the first checksum fails, it performs some additional checksum calculations to

determine where the valid program is located. This permits full automated program memory checking,

when there is no need for a custom boot program. The complete decision tree is located in Figure 6-28.

"Branch to Program Flash 1" means Flash 1 is at address 0x0000, and Flash 2 is at address 0x8000.

"Branch to Program Flash 2" means Flash 2 is at address 0x0000, and Flash 1 is at address 0x8000.

Detailed Description

Submit Documentation Feedback

Product Folder Links: UCD3138064

UCD3138064RGZR Folha de dados(PDF) 56 Page - Texas Instruments