24AA128EST datasheet(8/12 Pages) MICROCHIP

Nome de Peças	24AA128EST

Descrição Electrónicos	128K I 2 C ??CMOS Serial EEPROM

PDF	12 Pages

Scroll/Zoom	100%

Fabricante Electrônico	MICROCHIP [Microchip Technology]

Página de início	http://www.microchip.com

Logo

8 / 12 page

24AA128/24LC128

DS21191B-page 8

7.0

ACKNOWLEDGE POLLING

Since the device will not acknowledge during a write

cycle, this can be used to determine when the cycle is

complete (This feature can be used to maximize bus

throughput.) Once the stop condition for a write com-

mand has been issued from the master, the device ini-

tiates the internally timed write cycle. ACK polling can

be initiated immediately. This involves the master

sending a start condition, followed by the control byte

for a write command (R/W = 0). If the device is still busy

with the write cycle, then no ACK will be returned. If no

ACK is returned, then the start bit and control byte must

be resent. If the cycle is complete, then the device will

return the ACK, and the master can then proceed with

the next read or write command. See Figure 7-1 for

ﬂow diagram.

FIGURE 7-1:

ACKNOWLEDGE POLLING

FLOW

Send

Write Command

Send Stop

Condition to

Initiate Write Cycle

Send Start

Send Control Byte

with R/W = 0

Did Device

Acknowledge

(ACK = 0)?

Operation

YES

24AA128EST Folha de dados(PDF) 8 Page - Microchip Technology