| Os motores de busca de Datasheet de Componentes eletrônicos |
|
AN4121 Folha de dados(PDF) 4 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4121 Folha de dados(HTML) 4 Page - STMicroelectronics |
|
4 / 26 page ![]() AN4121 Application description Doc ID 023243 Rev 1 4/26 1 Application description Poly-phase systems, and particularly three-phase meters, are most commonly used in practical industrial applications, and in a few cases also for domestic use. The purpose of the STEVAL-IPE0010V1 + STEVAL-IPE0014V1 is STPMC1 and STPMS2 device demonstration but it can also be used as a starting point to design a Class 0.2 accuracy meter for power line systems from 2- to 4-wire delta or wye service. Each phase is monitored from an independent daughterboard, in which an autonomous power supply provides the supply to the board itself and, once it is connected, also to the motherboard. In this board, the STPMS2 device senses the phase current through a CT sensor, and the phase voltage through a voltage divider. The presence of a dedicated network reduces, for a large amount, the sampling (aliasing) noise, therefore increasing the meter precision. The STPMS2 outputs a sigma-delta stream sent, together with supply voltage, to the STPMC1 through a card edge connector. The motherboard receives from the daughterboards the sigma-delta streams that are further elaborated by the STPMC1. This device, from a 4.194 MHz crystal oscillator, provides a common clock with programmable frequency to all the daughterboards. The motherboard, through a 10-pin flat cable connector (P1 in Figure 2), can be interfaced to a microprocessor board to implement advanced metering features (multi-tariff, data management and storage, communication…). It also has stepper motor connectors for a simple energy meter implementation (W2, W5 in Figure 2). The STPMC1 board can also be interfaced to a dedicated GUI through the STPMxx parallel programmer/reader released with the application. Table 1. Operating conditions Condition Value Unit VNOM 230 VRMS INOM CT: INOM = 1 ARMS IMAX CT: IMAX = 30 ARMS fLIN 50/60 ± 10% Hz TOP - 40 / + 85°C |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |