2

sSpecifications

100 mA max.

100 V DC

100 V AC / 1 minute

Frequency:10 to 55 Hz, single amplitude of

0.75 mm, 2 hours in each of the 3 axis.

wave waveform, 3 cycles in each of the 3 axis

Temperature: -55ç / +5ç to +35ç / +85ç /+5ç to +35ç

Time: 30 / 5 max. / 30 / 5 max. (Minutes)

50 cycles

96 hours at 85ç

96 hours at -55ç

96 hours at 40±2ç, and humidity of 90 to 95%

100 cycles

100 mø max.

1000 Mø min.

No flashover or insulation breakdown

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

Insulation resistance: 10 Mø min.

Contact resistance: 100 mø max.

1. Contact resistance

2. Insulation resistance

3. Withstanding voltage

4. Vibration

5. Shock

6. Temperature cycle

7. High temperature exposure

8. Low temperature exposure

9. Humidity

10. Durability (mating/un-mating,

with corresponding plug)

Item

Specification

Conditions

Operating temperature range

Rated power

Frequency range

V.S.W.R.

Insertion loss

Isolation

Not mated with the plug

-40ç to +85ç

2W

DC to 11GHz

1.2 max. (DC to 2.5GHz)

1.3 max. (2.5GHz to 6.0GHz)

1.5 max. (6.0GHz to 11.0GHz)

0.15 dB max. (DC to 2.5GHz)

0.2 dB max. (2.5GHz to 6.0GHz)

0.4 dB max. (6.0GHz to 11.0GHz)

Mated (MS-156-HRMJ-3)

-40ç to +85ç

2W

DC to 8GHz

1.4 max. (DC to 3.0GHz)

1.8 max. (3.0GHz to 8.0GHz)

0.5 dB max. (DC to 3.0GHz)

0.8 dB max. (3.0GHz to 6.0GHz)

0.9 dB max. (6.0GHz to 8.0GHz)

20 dB min. (DC to 3.0GHz)

15 dB min. (3.0GHz to 6.0GHz)

12 dB min. (6.0GHz to 11.0GHz)

Shell

Insulator

Common terminal

Antenna terminal

Phosphor bronze

6T Nylon

Cu-Ni-Si alloy

Phosphor bronze

Gold plated

---------------------------

Selective gold plated

Selective gold plated

---------------------------

UL94HB

---------------------------

---------------------------

Part

Material

Finish

Remarks

sMaterials

No electrical discontinuity of 1 µs or more

Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and

specifications for a specific part number shown.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.