| Os motores de busca de Datasheet de Componentes eletrônicos |
|
SCA3000-D01 Folha de dados(PDF) 39 Page - VTI technologies |
|
|
|||||||||||||||||||||||||||||
SCA3000-D01 Folha de dados(HTML) 39 Page - VTI technologies |
|
39 / 43 page ![]() SCA3000 Series VTI Technologies Oy 39/ 43 www.vti.fi Doc.Nr. 8257300A.07 Rev.A.07 nominal output [counts] on input acceleration acc, Sens is sensor’s nominal sensitivity [counts/g] and FS is sensor’s full scale measuring range [g] (for example for SCA3000-D01 ±2g → FS = 2 g). Sensor’s ideal output Output@acc (in Equation 7) is calculated from the straight line through sensitivity calibration points (the red straight line in Figure 23). Nominal output is calculated by Equation 8 2 2 2 1 1 1 1 1 1 @ g g g g g g acc Output Output g Output Output acc offset g Output Output acc Output − + − + − + + + − ⋅ = + − ⋅ = , where Output@acc is sensor’s nominal output [counts] with input acceleration acc in [g], Output+1g is sensor’s measured output [counts] at +1 g input acceleration and Output-1g is sensor’s measured output at -1 g input acceleration. Possible offset term [counts] is included into nominal output, because it is not included in to linearity error. 8.4 Noise Output noise nX, nY and nZ in X,Y and Z directions is the measured standard deviation of the output values when the sensor is in 0 g position at room temperature. Average noise/axis is calculated by Equation 9 ()2 2 2 3 1 Z Y X n n n n + + = , where n is sensor’s noise [g] per axis, nX is sensor’s X-axis noise [g], nY is sensor’s Y-axis noise [g] and nZ is sensor’s Z-axis noise [g]. SCA3000 demo-kit design can be used as a reference design for noise measurements, refer to “SCA3000 DEMO KIT User Manual 8259300”. 8.5 Bandwidth Signal bandwidth is measured in a shaker by sweeping the piston movement frequency with constant amplitude (Figure 24). Z Earth’s gravitation Shaker movement in parallel to Z-axis Y X Pin #1 Figure 24. SCA3000 movement in Z-axis bandwidth measurement. 8.6 Cross-axis sensitivity Cross-axis sensitivity is sum of the alignment and the inherent sensitivity errors. Cross-axis sensitivity of one axis is a geometric sum of the sensitivities in two perpendicular directions. Cross-axis sensitivity [%] of X-axis is given by |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |