IO130PDB3V2 datasheet(61/212 Pages) MICROSEMI

61 / 212 page

Military ProASIC3/EL Low Power Flash FPGAs

Revision 3

2-47

Timing Characteristics

1.2 V DC Core Voltage

Table 2-61 • 3.3 V LVCMOS Wide Range Low Slew

Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 2.7 V

Applicable to Pro I/Os for A3PE600L and A3PE3000L Only

Drive

Strength

Equiv.

Software

Default

Drive

Strength

Option1

Speed

Grade tDOUT tDP tDIN tPY tPYS tEOUT tZL

tZH

tLZ

tHZ tZLS tZHS Units

100 µA

4 mA

Std.

0.80

9.08 0.05 2.18 3.16 0.52 9.08 7.17 3.85 3.40 11.28 9.38

–1

0.68

7.72 0.05 1.86 2.69 0.44 7.72 6.10 3.28 2.89 9.60 7.98

100 µA

8 mA

Std.

0.80

7.37 0.05 2.18 3.16 0.52 7.37 6.10 4.38 4.35 9.58 8.31

–1

0.68

6.27 0.05 1.86 2.69 0.44 6.27 5.19 3.73 3.70 8.15 7.07

100 µA

12 mA

Std.

0.80

6.17 0.05 2.18 3.16 0.52 6.17 5.30 4.73 4.94 8.37 7.51

–1

0.68

5.24 0.05 1.86 2.69 0.44 5.24 4.51 4.03 4.20 7.12 6.38

100 µA

16 mA

Std.

0.80

5.82 0.05 2.18 3.16 0.52 5.82 5.12 4.80 5.11 8.03 7.33

–1

0.68

4.95 0.05 1.86 2.69 0.44 4.95 4.36 4.09 4.34 6.83 6.23

100 µA

24 mA

Std.

0.80

5.64 0.05 2.18 3.16 0.52 5.64 5.14 4.90 5.72 7.85 7.35

–1

0.68

4.80 0.05 1.86 2.69 0.44 4.80 4.38 4.17 4.87 6.67 6.25

Notes:

1. Note that 3.3 V LVCMOS wide range is applicable to 100 µA drive strength only. The configuration will not operate at the

equivalent software default drive strength. These values are for normal ranges ONLY.

2. For specific junction temperature and voltage supply levels, refer to Table 2-5 on page 2-8 for derating values.

Table 2-62 • 3.3 V LVCMOS Wide Range High Slew

Military-Case Conditions: TJ = 125°C, Worst-Case VCC = 1.14 V, Worst-Case VCCI = 2.7 V

Applicable to Pro I/O Banks for A3PE600L and A3PE3000L Only

Drive

Strength

Equiv.

Software

Default

Drive

Strength

Option1

Speed

Grade tDOUT tDP

tDIN tPY tPYS tEOUT tZL

tZH

tLZ tHZ tZLS tZHS Units

100 µA

4 mA

Std.

0.80

5.00 0.05 2.18 3.16 0.52

5.00

3.77 3.85 3.62 7.21

5.97

–1

0.68

4.25 0.05 1.86 2.69 0.44

4.25

3.21 3.28 3.08 6.13

5.08

100 µA

8 mA

Std.

0.80

4.07 0.05 2.18 3.16 0.52

4.07

2.98 4.38 4.57 6.27

5.19

–1

0.68

3.46 0.05 1.86 2.69 0.44

3.46

2.54 3.73 3.89 5.33

4.41

100 µA

12 mA

Std.

0.80

3.54 0.05 2.18 3.16 0.52

3.54

2.60 4.73 5.19 5.74

4.81

–1

0.68

3.01 0.05 1.86 2.69 0.44

3.01

2.22 4.03 4.42 4.89

4.09

100 µA

16 mA

Std.

0.80

3.45 0.05 2.18 3.16 0.52

3.45

2.54 4.82 5.36 5.66

4.74

–1

0.68

2.94 0.05 1.86 2.69 0.44

2.94

2.16 4.10 4.56 4.81

4.03

100 µA

24 mA

Std.

0.80

3.49 0.05 2.18 3.16 0.52

3.49

2.44 4.91 5.98 5.69

4.64

–1

0.68

2.97 0.05 1.86 2.69 0.44

2.97

2.07 4.18 5.08 4.84

3.95

Notes:

1. Note that 3.3 V LVCMOS wide range is applicable to 100 µA drive strength only. The configuration will not operate at the

equivalent software default drive strength. These values are for normal ranges only.

2. For specific junction temperature and voltage supply levels, refer to the Table 2-5 on page 2-8 for derating values.

3. Software default selection highlighted in gray.

IO130PDB3V2 Folha de dados(PDF) 61 Page - Microsemi Corporation

IO130PDB3V2 Folha de dados(HTML) 61 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Folha de dados Download

Ligação URL