PIC10F220ESLASHP datasheet(53/86 Pages) MICROCHIP

53 / 86 page

DS41270E-page 51

PIC10F220/222

10.0

ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings(†)

Ambient temperature under bias.............................................................................................................-40°C to +125°C

Storage temperature ...............................................................................................................................-65°C to +150°C

Voltage on VDD with respect to VSS ..................................................................................................................0 to +6.5V

Voltage on MCLR with respect to VSS.............................................................................................................0 to +13.5V

Voltage on all other pins with respect to VSS .................................................................................. -0.3V to (VDD + 0.3V)

Total power dissipation(1) .....................................................................................................................................800 mW

Max. current out of VSS pin .....................................................................................................................................80 mA

Max. current into VDD pin ........................................................................................................................................80 mA

Input clamp current, IIK (VI < 0 or VI > VDD)

......................................................................................................................±20 mA

Output clamp current, IOK (VO < 0 or VO > VDD)

..............................................................................................................±20 mA

Max. output current sunk by any I/O pin .................................................................................................................25 mA

Max. output current sourced by any I/O pin ............................................................................................................25 mA

Max. output current sourced by I/O port .................................................................................................................75 mA

Max. output current sunk by I/O port ......................................................................................................................75 mA

Note 1: Power dissipation is calculated as follows: PDIS = VDD x {IDD –

∑ IOH} + ∑ {(VDD – VOH) x IOH} .. + ∑(VOL x

IOL)

†NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only and functional operation of the device at those or any other conditions above

those indicated in the operation listings of this specification is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

PIC10F220E/P Folha de dados(PDF) 53 Page - Microchip Technology

PIC10F220E/P Folha de dados(HTML) 53 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

Folha de dados Download

Ligação URL