SST58LM016 datasheet(21/40 Pages) SST

21 / 40 page

Advance Information

ATA-Disk Module

SST58SM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192

SST58LM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192

S71193-01-000

9/01

519

3.2.1.3 Format Track - 50H

This command writes the desired head and cylinder of the selected drive with a vendor unique data

pattern (typically FFH or 00H). To remain host backward compatible, the ADM expects a sector buffer of

data from the host to follow the command with the same protocol as the Write Sector(s) command

although the information in the buffer is not used by the ADM. If LBA=1 then the number of sectors to

format is taken from the Sec Cnt register (0=256). The use of this command is not recommended.

3.2.1.4 Identify Drive - ECH

The Identify Drive command enables the host to receive parameter information from the ADM. This

command has the same protocol as the Read Sector(s) command. The parameter words in the buffer

have the arrangement and meanings defined in Table 3-4. All reserved bits or words are zero. Table 3-4

is the definition for each field in the Identify Drive Information.

Bit ->

Command (7)

50H

C/D/H (6)

LBA

Drive

Head (LBA 27-24)

Cyl High (5)

Cylinder High (LBA 23-16)

Cyl Low (4)

Cylinder Low (LBA 15-8)

Sec Num (3)

X (LBA 7-0)

Sec Cnt (2)

Count (LBA mode only)

Feature (1)

Bit ->

Command (7)

ECH

C/D/H (6)

Drive

Cyl High (5)

Cyl Low (4)

Sec Num (3)

Sec Cnt (2)

Feature (1)

SST58LM016 Folha de dados(PDF) 21 Page - Silicon Storage Technology, Inc

SST58LM016 Folha de dados(HTML) 21 Page - Silicon Storage Technology, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Folha de dados Download

Ligação URL