| Os motores de busca de Datasheet de Componentes eletrônicos |
|
SST58LM016 Folha de dados(PDF) 19 Page - Silicon Storage Technology, Inc |
|
|
|||||||||||||||||||||||||||||
SST58LM016 Folha de dados(HTML) 19 Page - Silicon Storage Technology, Inc |
|
19 / 40 page ![]() Advance Information ATA-Disk Module SST58SM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 SST58LM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192 19 ©2001 Silicon Storage Technology, Inc. S71193-01-000 9/01 519 3.2 ATA-Disk Module Command Description This section defines the software requirements and the format of the commands the host sends to the ADM. Com- mands are issued to the ADM by loading the required registers in the command block with the supplied parame- ters, and then writing the command code to the Command Register. The manner in which a command is accepted varies. There are three classes (see Table 3-2) of command acceptance, all dependent on the host not issuing commands unless the ADM is not busy (BSY=0). 3.2.1 ATA-Disk Module Command Set Table 3-2 summarizes the ADM command set with the paragraphs that follow describing the individual commands and the task file for each. TABLE 3-2: ATA-DISK MODULE COMMAND SET Class Command Code FR1 1. FR - Features Register SC2 2. SC - Sector Count Register SN3 3. SN - Sector Number Register CY4 4. CY - Cylinder Registers DH5 5. DH - Drive/Head Register LBA6 6. LBA - Logical Block Address Mode Supported (see command descriptions for use) 1 Check Power Mode E5H or 98H - - - - D8 - 1 Execute Drive Diagnostic 90H - - - - D - 2 Format Track 50H - Y7 7. Y - The register contains a valid parameter for this command. -Y Y8 8. For the Drive/Head Register: Y means both the ADC and Head parameters are used; D means only the ADC parameter is valid and not the Head parameter. Y 1 Identify Drive ECH - - - - D - 1 Idle E3H or 97H - Y - - D - 1 Idle Immediate E1H or 95H - - - - D - 1 Initialize Drive Parameters 91H - Y - - Y - 1 Read Buffer E4H - - - - D - 1 Read Long Sector 22H or 23H - - Y Y Y Y 1 Read Multiple C4H - YYYY Y 1 Read Sector(s) 20H or 21H - YYYY Y 1 Read Verify Sector(s) 40H or 41H - YYYY Y 1 Recalibrate 1XH - - - - D - 1 Seek 7XH - - YYY Y 1 Set Features EFH Y - - - D - 1 Set Multiple Mode C6H - Y - - D - 1 Set Sleep Mode E6H or 99H - - - - D - 1 Stand By E2H or 96H - - - - D - 1 Stand By Immediate E0H or 94H - - - - D - 2 Write Buffer E8H - - - - D - 2 Write Long Sector 32H or 33H - - Y Y Y Y 3 Write Multiple C5H - YYYY Y 2 Write Sector(s) 30H or 31H - YYYY Y 3 Write Verify 3CH - YYYY Y T3-2.0 519 |
|
Ligação URL |
| ALLDATASHEET é útil para você? [ DONATE ] |
Sobre Alldatasheet | Publicidade | Contato conosco | Privacy Policy | Link para a ficha técnica | roca de Link | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |